Samsung UE19F4000AW User Manual download pdf (Page 7)

English

Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you do not insert the “CI or CI+ CARD”, some channels will display

the message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or

CI+ CARD” ID the Host ID and other information will be displayed in

about 2~3 minutes. If an error message is displayed, please contact

your service provider.

• When the conﬁguration of channel information has ﬁnished, the

message “Updating Completed” is displayed, indicating the channel

list is updated.

• The image may differ depending on the model.

✎

NOTE

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause

damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the POWER

button. Setup is available only when the source is set to TV.

✎

If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top box

automatically. If you do not want to select Set-top box, please select Aerial.

If You Want to Reset This Feature...

You should do Setup (MENU → System) again at home although you did in shop.

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0” (except Italy). If you want to

change the PIN number, use the Change PIN function.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN

to “0-0-0-0” (Italy: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

Changing the Input Source

Source

TV / Ext. / HDMI1 / HDMI2/DVI / AV / Component

Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.

✎

Press the SOURCE button. In the displayed Source list, connected inputs will be highlighted.

✎

PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable with the HDMI IN

2(DVI) port on the TV.

✎

Ext. always stays activated.

✎

Press the TOOLS button.

• Edit Name

You can set an external input source name you want.

– When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.

– When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under

Edit Name.

– When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices

mode under Edit Name.

• Information

You can see detailed information about the connected external device.

English - 7

[UF40005000S-ZGZT]BN68-04904B-02L04.indb 7 2013-11-20  4:45:32

1 2 3 4 5 6 7 8 9 10 11 12 ... 66 67

Comments to this Manuals

No comments

Samsung UE19F4000AW User Manual Page 7

Comments to this Manuals

Related products and manuals for Televisions Samsung UE19F4000AW