Samsung ED65E User Manual download pdf

Quick Setup Guide

- Recommended hours of use per day of this product is under 16 hours.

If the product is used for longer than 16 hours a day, the warranty may be void.

- The colour and the appearance may differ depending on the product, and the specifications

are subject to change without prior notice to improve the performance.

- Download the user manual from the website for further details.

http://www.samsung.com/displaysolutions

ED65E ED75E

BN6807653H00

The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing

LLC in the United States and other countries.

Reverse Side

1 Connect to a USB memory device.

2 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.

MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box (sold separately).

3 Connects to a source device using an HDMI cable.

4 Connects to a source device using a D-SUB cable.

5 Connects to MDC using an RS232C adapter.

6 Receives sound from a PC via an audio cable.

7 Connects to the audio of a source device.

8 Connects to a source device using the AV/Component adapter.

9 Supplies power to the external sensor board or receives the light sensor signal.

Issues Solutions

The screen keeps

switching on and off.

Check the cable connection between the

product and PC, and ensure the connection is

secure.

No Signal is displayed

on the screen.

Check that the product is connected correctly

with a cable.

Check that the device connected to the

product is powered on.

Not Optimum Mode is

displayed.

This message is displayed when a signal

from the graphics card exceeds the product’s

maximum resolution and frequency.

Refer to the Standard Signal Mode Table and

set the maximum resolution and frequency

according to the product specifications.

The images on the

screen look distorted.

Check the cable connection to the product.

The screen is not clear.

The screen is blurry.

Adjust Coarse and Fine.

Remove any accessories (video extension

cable, etc) and try again.

Set the resolution and frequency to the

recommended level.

The screen appears

unstable and shaky.

Check that the resolution and frequency of the

PC and graphics card are set within a range

compatible with the product. Then, change the

screen settings if required by referring to the

Additional Information on the product menu

and the Standard Signal Mode Table.

There are shadows or

ghost images left on the

screen.

Issues Solutions

The screen is too bright.

The screen is too dark.

Adjust Brightness and Contrast.

Screen colour is

inconsistent.

Go to Picture and adjust the Colour Space

settings.

White does not really

look white.

Go to Picture and adjust the White Balance

settings.

There is no sound. Check the connection of the audio cable or

adjust the volume.

Check the volume.

The volume is too low. Adjust the volume.

If the volume is still low after turning it up to

the maximum level, adjust the volume on

your PC sound card or software programme.

The remote control does

not work.

Make sure that the batteries are correctly in

place (+/-).

Check if the batteries are flat.

Check for power failure.

Make sure that the power cord is connected.

Check for any special lighting or neon signs

switched on in the vicinity.

Troubleshooting Guide

Checking the Components

Control Panel

Contact the vendor where you purchased the product if any

components are missing.

The pictures may look different from the actual components.

Speaker

Power on the product.

If you press the button when the product is turned on, the control

menu will be displayed.

To exit the OSD menu, press and hold the panel key for at least one second.

Move to the upper or lower menu. You can also adjust the value of an option.

Move to the left or right menu.

- You can adjust the volume by moving the panel key left or right

when the control menu is not displayed.

Remote sensor

Press a button on the remote control pointing at the sensor on the

front of the product to perform the corresponding function.

Spacer logo (Optional)

Do not pull on the spacer logo using force. The logo may tear or break off.

Quick Setup Guide

Warranty card

(Not available in some locations)

Power cord

Batteries

(Not available in some locations)

Remote Control D-SUB cable

RS232C(IN) adapter

Holder-Ring (4EA)

AV/Component

adapter

AUDIO adapter

EDE65-75-India-QSG_BN68-07653H-00.indd 1 2015-11-26  4:33:53

1 2

Quick Setup Guide 1

Summary of Contents

Page 1 - Quick Setup Guide

Quick Setup Guide - Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than 16 hours a day, the wa

Page 2

SpecificationsModel Name ED65E ED75EPanelSize 163 cm 189 cmDisplay area 1428.48 mm (H) x 803.52 mm (V) 1650.24 mm (H) x 928.26 mm (V)Dimensions (W x H

Samsung ED65E User Manual

Browse online or download User Manual for Unknown Samsung ED65E. Samsung ED65E Quick start guide

Summary of Contents

More documents for Unknown Samsung ED65E

Comments to this Manuals

Samsung ED65E User Manual

Browse online or download User Manual for Unknown Samsung ED65E. Samsung ED65E Quick start guide

Summary of Contents

More documents for Unknown Samsung ED65E

Comments to this Manuals

Related products and manuals for Unknown Samsung ED65E