Samsung QM98F User Manual download pdf

Quick Setup Guide

− The colour and the appearance may differ depending on the product, and the

specifications are subject to change without prior notice to improve the performance.

− Download the user manual from the website for further details.

http://www.samsung.com/displaysolutions

QM98F

BN68-08390H-01

Reverse Side

1 Connects to MDC using an RS232C adapter.

DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.

PC:

Connects a D-SUB cable (via a DVI-RGB adapter) or a DVI-RGB

cable to a PC.

MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI

cable.

Connects to a source device using a HDMI cable or HDMI-DVI cable.

Obtain sharp picture quality when viewing UHD content at 30Hz.

4 Connects to a PC using a DP cable.

Obtain sharp picture quality when viewing UHD content at 60Hz.

5 Connects to MDC using a LAN cable.

6 Connects to MDC using an RS232C adapter.

7 Supplies power to the external sensor board or receives the light

sensor signal.

8 Receives the remote control signal via the external sensor board

and outputs the signal via LOOP OUT.

9 Connects to a USB device when upgrading software.

0 Receives sound from a PC via an audio cable.

! Connects to the audio of a source device.

Issues Solutions

The screen keeps

switching on and off.

Check the cable connection between

the product and PC, and ensure the

connection is secure.

No Signal is displayed

on the screen.

Check that the product is connected

correctly with a cable.

Check that the device connected to the

product is powered on.

Depending on the type of external device,

the screen may not display properly. In

this case, connect it with the HDMI Hot

Plug function turned On.

Not Optimum Mode is

displayed.

This message is displayed when a

signal from the graphics card exceeds

the product’s maximum resolution and

frequency.

Refer to the Standard Signal Mode Table

and set the maximum resolution and

frequency according to the product

specifications.

The images on the

screen look distorted.

Check the cable connection to the

product.

The screen appears

unstable and shaky.

Check that the resolution and frequency

of the PC and graphics card are set within

a range compatible with the product.

Then, change the screen settings if

required by referring to the Additional

Information on the product menu and the

Standard Signal Mode Table.

There are shadows or

ghost images left on

the screen.

Issues Solutions

There is no image on

the screen and the

power LED blinks

every 0.5 to 1 second.

The product is in power-saving mode.

Press any key on the keyboard or move the

mouse to return to the previous screen.

Picture quality of the

product is different

from the dealer

shop where it was

purchased.

Use an HDMI cable to obtain high-

definition (HD) picture quality.

The remote control

does not work.

Make sure that the batteries are correctly

in place (+/-).

Check if the batteries are flat.

Check for power failure.

Make sure that the power cord is connected.

Check for any special lighting or neon

signs switched on in the vicinity.

A beeping sound is

heard when my PC is

booting.

If a beeping sound is heard when your PC

is booting, have your PC serviced.

When I try to change

the PC resolution, a

message The

defined resolution

is not supported.

appears.

The message The defined resolution

is not supported. appears if the input

source resolution exceeds the maximum

resolution of the display.

To resolve the issue, change the PC

resolution to a resolution supported on

the display.

Troubleshooting Guide

Checking the Components

Control Panel

Contact the vendor where you purchased the product if any

components are missing.

The pictures may look different from the actual components.

1 Spacer logo

Do not pull on the spacer logo using force. The logo may tear or

break off.

2 Remote sensor

Press a button on the remote control pointing at the bottom of

the product face to perform the function. The remote control

sensor is located on the bottom of the product.

- Using other display devices in the same space as the remote

control of this product can cause the other display devices to

be inadvertently controlled.

To use remote/eco sensor, make sure the sliding panel key is

protruding from the bottom of the product.

3 Panel Key

To use the panel key, make sure the sliding panel key is not

protruding from the bottom of the product.

Quick Setup Guide

Warranty card

(Not available in some locations)

MagicInfo Software

DVD

Power cord

Batteries

(Not available in some locations)

Remote Control

RS232C(IN) adapter

HOLDER-CABLE

Speaker

DP IN 1

(UHD 60Hz)

RJ45

RS232C IN

DVI/PC/

MAGICINFO IN

HDMI IN 4

HDMI IN 3

HDMI IN 2

HDMI IN 1

DP IN 2

(UHD 60Hz)

IR OUT

IR IN

RS232C

OUT

DVI/PC/

HDMI/

AUDIO IN

AUDIO OUT

SERVICE

The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

QM98F_INDIA_QSG_BN68-08390H-01.indd 1 2017-06-23 오후 2:06:15

1 2

Quick Setup Guide 1
AUDIO OUT 2

Summary of Contents

Page 1 - Quick Setup Guide

Quick Setup Guide − The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior noti

Page 2 - AUDIO OUT

SpecificationsModel Name QM98FPanelSize 247.7 cmDisplay area2158.848 mm (H) x 1214.352 mm (V)Power SupplyAC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 H