Samsung WD90J6400AW User's Guide download pdf (Page 54)

54 English

Troubleshooting

Problem Action

Check the drain hose.

• Make sure the end of the drain hose is placed on the oor.

• Make sure the drain hose is not clogged.

• If the information code remains, contact a customer service

centre.

NOTE

When the washer displays the “LC/LC1” code, the washer do

draining for 3 minutes. During this time, the Power ( ) button

is inoperative.

LC1

Spinning does not work.

• Make sure laundry is spread out evenly.

• Make sure the washing machine is on a at, stable surface.

• Redistribute the load. If only one item of clothing needs

washing, such as a bathrobe or pair of jeans, the nal spin

result might be unsatisfactory, and an “UB” check message

will be shown in the display.

Check the motor for operation.

• Try restarting the cycle.

• If the information code remains, contact a customer service

centre.

The electronic control needs to be checked (Over Voltage Error).

• Check the PCB and wire harness.

• Check if power is supplied properly

• If the information code remains, contact a customer service

centre.

Low voltage detected.

• Check if the power cord is plugged in.

• If the information code remains, contact a customer service

centre.

High temperature heating check.

• If the information code remains, contact a customer service

centre.

WD90J6400AW_DC68-03591J_EN.indd 54 2015/6/29 15:57:21

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 299 300

No comments

Samsung WD90J6400AW User's Guide Page 54