Samsung WF906U4SAGD/SG User Manual download pdf (Page 17)

setting up your washing machine _17

01 setting up

STEP 3



When installing your washing machine, ensure that the power plug, the water supply and

the drain are easily accessible.

1. Slide the washing machine into position.

2. Level your washing

machine by turning the

levelling feet in and out as

necessary by hand.

3. When your washing machine is level, tighten the nuts using

the wrench supplied with your washing machine.

STEP 4



Connecting the water supply hose

1. Take the L-shaped arm ﬁtting for the cold water

supply hose and connect it to the cold water

supply intake on the back of the machine.

Tighten by hand.

The water supply hose must be connected to

the washing machine at one end and to the

water tap at the other. Do not stretch the water

supply hose. If the hose is too short, replace

the hose with a longer, high pressure hose.

2. Connect the other end of the cold water supply

hose to your sink’s cold water tap and tighten

it by hand. If necessary, you can reposition the

water supply hose at the washing machine end

by loosening the ﬁtting, rotating the hose, and

retightening the ﬁtting.



1. Take the red L-shaped arm ﬁtting for the hot water supply hose and connect it to the hot

water supply intake on the back of the machine. Tighten by hand.

2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten

it by hand.

3. Use a Y-piece if you only want to use cold water.



WF906U4SA-03205T-03_EN.indd 17 2014/6/27 10:59:11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

No comments

Samsung WF906U4SAGD/SG User Manual Page 17