Samsung HT-DS660T User Manual download pdf (Page 33)

SsttinQ thG RRSSjRear

Reflecting Surround System)

By setting up the RRSS function just once, the speaker distance, channel level, and rear sound

reflection effect are automatically set and create an optimal listening environment.

This function works only in DVD/CD mode.

Connect the RRSS

■

............

................

....

position.

Press the

When "REMOVE MIC

A speaker tone will be heard once

from each speaker in the order of

L C R -* RS LS SW, and

then the newly set error tone will be

heard again from L R.

An optimal listening environment will

be set up automatically.

It takes about 3 to 4 minutes to

complete the RRSS setup.

Tone Output

A piano sound will be heard and the

setup will be completed.

• The RRSS button works as the RRSS setup function shown above if the RRSS Microphone is connected, and works as the rear sound

reflection effect function If the microphone is removed.

• If you are installing the system for the first time or if you have initialized the system, "NO MEASURED DATA" will appear on the display

when you press the RRSS button without connecting the RRSS Microphone.

• During the RRSS setup, the output volume of the tone is fixed and you cannot use the volume control buttons to adjust the output level.

• If you remove the RRSS Microphone during the RRSS setup, the setup will be cancelled.

• Place the front and left speakers (L/R) toward the side walls so that the rear speaker sound is reflected against the walls.

Briefly press the RRSS button.

(If you have set the RRSS for the first time according to

Steps 1 to 3 on the previous page)

• Your selection will toggle between "REAR REFLECTING

ON" and "REAR REFLECTING OFF" on the display.

• Select "REAR REFLECTING ON" to listen using the

RRSS setting and select "REAR REFLECTING OFF" to

listen to the disc currently being played in its original

setting.

When you turn on the power, a sound logo will be heard,

indicating that the disc reading is completed and the player is

in its optimal condition to play the disc.

1. Press and hold the RRSS button.

• "S.LOGO ON" or "S.LOGO OFF" appears on the

display.

I To check the RRSS that you have set

2. Briefly press the RRSS button.

• Each time you press the button, your selection toggles

between "S.LOGO ON" and "S.LOGO OFF".

• Select "S.LOGO ON" to enable the sound logo and

select "S.LOGO OFF" to disable the sound logo.

1. Press and hold the RRSS button twice.

• "CHECK" appears on the display.

2. Next,briefly press the RRSS button.

• The speaker distance and level value for each channel

will be displayed.

Caution

If the system is installed at a location where sound cannot

be reflected (e.g., an open space without walls), the speaker

distance, channel level, and rear sound reflection effect may

be set incorrectly during the RRSS setup.

To cancel the RRSS setup

Press the RRSS button.

• The tone output stops, "CANCEL" appears on the

display, followed by "REMOVE MIC", and then the

setup will be cancelled.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

Comments to this Manuals

No comments

Samsung HT-DS660T User Manual Page 33

Comments to this Manuals

Related products and manuals for Acoustics Samsung HT-DS660T