Samsung TX-P1430 User's Guide download pdf (Page 145)

Composer Pro User Guide

Saved: 4/14/2011 4:10:00 PM

200-00005 Composer Pro

User Guide Part 2

Page 145 of 179

You can customize the following communication options for each 5" or 7" In-Wall Touch Screen:

• Manual Answer Popup Timeout (seconds): This is the amount of time the popup remains

on the screen if the Set Answer mode's Manual option is selected.

• Microphone: Raise or lower the microphone volume using the slider bar or the up or down

arrows. Note: This can be set also on the 5" or 7" In-Wall Touch Screen or in programming.

• Speaker: Raise or lower the speaker's volume using the slider bar or the up or down arrows.

Note: This can be set also on the 5" or 7" In-Wall Touch Screen or in programming.

• Exclude from Navigator: Select if you do not want these options enabled. This option is

useful when you want to broadcast messages to the 5" or 7" In-Wall Touch Screens.

• Privacy: Select to enable privacy which ensures that other Intercom devices cannot listen in

through this 5" or 7" In-Wall Touch Screen (office, bathroom, etc.).

• Ring Disabled: Select to disable a particular 5" or 7" In-Wall Touch Screen from being notified

via a ring tone.

• Set Answer mode:

• Manual: Select to have the user answer manually when someone calls in a full-duplex

session.

• Auto: Select to automatically initiate a full-duplex call without requiring any user

interaction. To broadcast a message, select this option.

• Do Not Disturb: Select to ensure that the Intercom device does not receive any

broadcasts. Note: If you select Privacy AND Do Not Disturb, the Touch Screen is not

available for broadcasts or calls.

Click Apply Changes when you're finished.

Example: The steps below use an example where a macro is set up to monitor the Kitchen from the

Master Bedroom using the Intercom on both 7" In-Wall Touch Screens.

To set up a program that monitors a room using the Intercom agent:

1. If the Macro Agent hasn't been added to the project, add it (Agents view > Add > Macros).

2. Create a new macro called Monitor Kitchen.

3. In the Programming view, create programming for the "Monitor Kitchen" macro event

(Programming > Macros in the Device Events pane, and then select the macro Monitor

Kitchen).

4. Add the programming to start monitoring the Kitchen (Programming > Actions > Intercom in the

Device Actions pane).

a. In the Commands tab, select the device that will be doing the monitoring (7” In-Wall Touch

Screen in the Master > Master Bedroom).

b. Select the Session Action: Monitor.

c. Select the Target Intercom Device that will be monitored (Kitchen->Kitchen (IE5)).

d. Drag the green arrow to the Script pane.

5. Test the Programming by clicking Execute.

Tip: Add the macro to a Custom Home page on the Navigator; another option is to program this same

action against a button press. There are four (4) buttons on the 7" In-Wall Touch Screens.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 178 179

Comments to this Manuals

No comments

Samsung TX-P1430 User's Guide Page 145

Comments to this Manuals

Related products and manuals for Audio cards Samsung TX-P1430