Samsung iPOLiS SNP-3120V User Manual

NETWORK CAMERAUser ManualSNP-3120/3120V/3120VH

overview10_ overviewPRODUCT FEATURES Multi-StreamingThis network camera can display videos in different resolutions and qualities simultane-ously usi

setup screen100_ setup screenDate & Time1. From the Setup menu, select the <System ( )> tab.2. Click <Date & Time>.3. Specify

English _101● SETUP SCREEN Guest setup : If <Guest access> is permitted, any guest can access the Web Viewer screen but can view only the Live

setup screen102_ setup screenTo perform the upgrade1. Click [Upgrade].2. Click [Browse] and specify a file to upgrade.3. Click [Send].4. The “Upgr

English _103● SETUP SCREENLogYou can check the system log or event log.1. From the Setup menu, select the <System ( )> tab.2. Click <Log&

104_ appendixSPECIFICATIONItemsDescriptionSNP-3120 SNP-3120V SNP-3120VHVideoImaging Device 1/4" Ex-view HAD PS CCDTotal Pixels NT : 811(H) x 508(

English _105● APPENDIXItemsDescriptionSNP-3120 SNP-3120V SNP-3120VHPan / Tilt / RotatePan Range 360˚ EndlessPan Speed Preset : 650˚/sec, Manual : 0.0

appendix106_ appendixItemsDescriptionSNP-3120 SNP-3120V SNP-3120VHOperationalGain Control Off / Low / Medium / High / ManualWhite Balance ATW (In) / A

English _107● APPENDIXItemsDescriptionSNP-3120 SNP-3120V SNP-3120VHNetworkVideo Quality AdjustmentH.264/MPEG4 : Compression Level, Target Bitrate Lev

appendix108_ appendixItemsDescriptionSNP-3120 SNP-3120V SNP-3120VHEnvironmentalOperating Temperature / Humidity-10°C ~ +50°C (+14°F ~ +122°F) /~90% RH

English _109● APPENDIXPRODUCT OVERVIEW ❖SNP-3120 ❖SNP-3120VØ174.0 (Max)168.0108.0R60.0zhtz|unØ165.0165.0102.5R60.0

English _11● OVERVIEWWHAT’S INCLUDEDPlease check if your camera and accessories are all included in the product package.Appearance Item NameQuantityD

appendix110_ appendix ❖SNP-3120VHzhtz|unR60.0Ø200.0120.0184.019.0203.0

English _111● APPENDIXTROUBLESHOOTINGPROBLEM SOLUTIONI can’t access the camera from a web browser. yCheck to make sure that the camera’s Network sett

appendix112_ appendixPROBLEM SOLUTIONNo JPEG file is transferred via e-mail on occurrence of intelligent video analysis event of camera even when the

OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows.Component Name Lice

Copyright (c) 1998-2001 University College LondonAll rights reserved.Redistribution and use in source and binary forms, with or without modification,

GPL/LGPL SOFTWARE LICENSEThe software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the c

original authors' reputations.Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistribu

based on the Program is not required to print an announcement.)These requirements apply to the modified work as a whole. If identifiable sections of t

However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties rema

a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions eith

overview12_ overviewAppearance Item NameQuantityDescription Model NameTemplate 1 Product installation guide SNP-3120ASSY-Tapping Screw 4Used for insta

WARRANTY ; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more detai

or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: res

An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1

3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under

model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered

or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modifica

or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph

Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use

work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requir

USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released

English _13● OVERVIEWAT A GLANCE ❖SNP-3120Item DescriptionMain unit Main unit includes the lens, switch board, PCB boards and screws.bDome Cover Dom

Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits m

is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that

it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy

1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable “work that uses the Library”, as object

it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if yo

later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever pub

WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more

Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft. com) All rights reserved. This package is an SSL implementation written by

SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +

overview14_ overview ❖SNP-3120VItem DescriptionSurface Mount BracketUsed to install the camera directly on the ceiling. After separating this cover,

English _15● OVERVIEW ❖SNP-3120VHItem DescriptionSun Shield Housing Used to protect the main unit from the sunlight.bMain unit Main unit includes th

overview16_ overview ❖Camera Wiring Interface BoardFor the camera wiring, please refer to the picture below. When using coaxial communication, a separ

English _17● OVERVIEWPower, Video & Communication Signal ConnectionNo. Name Usage1 VIDEO Video Output2 GND Ground3 485+ Controller Data Line4 485

18_ installation & connectioninstallation & connectionDIP SWITCH SETTINGHow to set up Protocols and ID DIP SwitchesYou can control various set

English _19● INSTALLATION & CONNECTIONCommunication Protocol DIP Switch Settings (SW2)Coaxial communication automatically detects signals, and so

Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved.Trade mark is the registered logo of Samsung Techwin Co., Ltd. The name of this product

installation & connection20_ installation & connection Baud Rate SettingsSelect the transfer speed of a selected communication protocol.No. B

English _21● INSTALLATION & CONNECTION M  To use a third party controller with this product, please contact our After-Sales Service or Technolog

installation & connection22_ installation & connection Camera ID ChartID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#81 ON/OFF OFF

English _23● INSTALLATION & CONNECTIONID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#842 OFF ON OFF ON OFF ON OFF OFF43 ON ON OFF ON OF

installation & connection24_ installation & connectionID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#885 ON OFF ON OFF ON OFF ON OFF

English _25● INSTALLATION & CONNECTIONID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8128 OFF OFF OFF OFF OFF OFF OFF ON129 ON OFF OFF

installation & connection26_ installation & connectionID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8171 ON ON OFF ON OFF ON OFF ON

English _27● INSTALLATION & CONNECTIONID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8214 OFF ON ON OFF ON OFF ON ON215 ON ON ON OFF ON

installation & connection28_ installation & connectionINSTALLATION (SNP-3120) On-ceiling installation1. Drill a hole of 60mm diameter on the

English _29● INSTALLATION & CONNECTION5. Align the “Align The Arrow” triangular edge of the camera to the marking (shown as “A” in the diagram) o

English _3● OVERVIEWIMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instruc

installation & connection30_ installation & connectionFlush Mount Type Installation Example1. Attach the template, and then drill a hole acco

English _31● INSTALLATION & CONNECTION4. Connect each camera cable to the proper ter-minals on the bottom of the camera (Refer to Page 16: “Came

installation & connection32_ installation & connectionINSTALLING WITH ACCESSORIES (SOLD SEPARATELY)1. Turn the Dome Cover counter-clockwise a

English _33● INSTALLATION & CONNECTION3. Fix the Mount Housing onto the Hanging Mount (SBP-300HM) with 4 screws (M4xL16). J  Note that the reco

installation & connection34_ installation & connectionINSTALLATION (SNP-3120V)Ceiling Mount1. Use the provided L-shaped wrench to remove the

English _35● INSTALLATION & CONNECTION3. Connect the safety wire (attached to the camera) to the surface mount as shown. Then, arrange the cables

installation & connection36_ installation & connectionMount onto the optimal adaptor1. Follow step 1 in “Ceiling Mount” above and remove the

English _37● INSTALLATION & CONNECTIONINSTALLATION (SNP-3120VH)1. Use the provided L-shaped wrench to loosen 4 screws counter clockwise, which

installation & connection38_ installation & connection3. Secure the safety wire (attached to the product) to the housing as shown. For detai

English _39● INSTALLATION & CONNECTIONOptional Accessories for InstallationFor your easier installation, you can purchase appropriate optional ac

overview4_ overviewWARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJ

installation & connection40_ installation & connection3. When installing the Wall Mount (SBP-300WM) on a pole bigger than 80mm in diameter :

English _41● INSTALLATION & CONNECTIONINSERTING/REMOVING AN SD MEMORY CARDInserting an SD Memory CardPush the SD memory card in the direction of

installation & connection42_ installation & connectionMEMORY CARD INFORMATION (NOT INCLUDED)What is a memory card?The memory card is an extern

English _43● INSTALLATION & CONNECTIONCONNECTING WITH OTHER DEVICEConnecting to the monitor Connect the video out port of the camera to the video

installation & connection44_ installation & connectionConnecting to Audio Input/Output1. Connect the AUDIO IN port of the camera with the mic

English _45● INSTALLATION & CONNECTIONAlarm I/O Wiring DiagramConnecting to the I/O port boxConnect the Alarm I/O signal to the corresponding por

46_ network connection and setupYou can set up the network settings according to your network configurations.CONNECTING THE CAMERA DIRECTLY TO LOCAL A

English _47● NETWORK CONNECTION AND SETUPCONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM1. Use the cross LAN cable to connect the net

48_ network connection and setupnetwork connection and setupCONNECTING THE CAMERA DIRECTLY TO A PPPOE MODEM1. Use the cross LAN cable to connect the

English _49● NETWORK CONNECTION AND SETUPCONNECTING THE CAMERA TO AN IP ROUTER WITH THE PPPOE/CABLE MODEMThis is for a small network environment such

English _5● OVERVIEWWhen used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed.CAUTIONThese servicing ins

50_ network connection and setupnetwork connection and setupBUTTONS USED IN IP INSTALLERItem DescriptionDevice NameModel name of the connected camera

English _51● NETWORK CONNECTION AND SETUPItem DescriptionURLDDNS URL address enabling access from the external Internet.However, this will be replac

52_ network connection and setupnetwork connection and setup3. In the <Address> pane, provide the necessary information. MAC (Ethernet) Addres

English _53● NETWORK CONNECTION AND SETUP J  The default password can be exposed to a hacking thread so it is recommended to change the password aft

54_ network connection and setupnetwork connection and setup3. Enter the password.This is the login password for the “admin” user who accesses the ca

English _55● NETWORK CONNECTION AND SETUPPORT RANGE FORWARD (PORT MAPPING) SETUPIf you have installed an IP router with a camera connected, you must

56_ network connection and setupnetwork connection and setupSetting up Port Range Forward for several network camerasWhen several network camera conne

English _57● NETWORK CONNECTION AND SETUPCONNECTING TO THE CAMERA FROM A SHARED LOCAL PC1. Run the IP Installer.It will scan for connected cameras a

58_ web viewerweb viewerCONNECTING TO THE CAMERANormally, you would1. Launch the Internet browser.2. Type the IP address of the camera in the address

English _59● WEB VIEWERTo check the DDNS addressIf the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP addres

overview6_ overviewPlease read the following recommend safety precautions carefully.User’s Manual is a guidance book how to use the productsThe meanin

60_ web viewerweb viewerThis network camera uses Microsoft Silverlight for displaying the video.INSTALLING SILVERLIGHT RUNTIMEIf your PC has not insta

English _61● WEB VIEWER5. When done, click <Close>.6. Close and restart the web browser, and try to access the Web Viewer.When Silverlight Ru

62_ web viewerweb viewerUSING THE LIVE SCREENItem DescriptionMonitoring Move to the monitoring screen.bPlayback Switch to the monitoring screen that

English _63● WEB VIEWERItem DescriptionPTZYou can adjust the Pan/Tilt angle of the camera as well as the zoom factor.Digital PTZ You can use the mo

64_ web viewerweb viewerTo toggle the audio sound1. Click the [Audio ( )] button. The corresponding button will be dis-played in the Viewer.2. Cli

English _65● WEB VIEWERTo activate a presetTo perform the designated preset in the Live screen, right-click the mouse and select your desired preset

66_ web viewerweb viewerTo back up the searched video1. Click [ ] on the scene to back up.Save as window appears.2. Click [Save].The screenshot wi

English _67● CAMERA SETUPUSING THE CAMERA MENUFollow the steps below if you run the Web Viewer for setting the menus.1. Launch the Web Viewer.2. Cl

camera setup68_ camera setupZoom/FocusMain Menu Ö Camera Setting Ö Zoom/Focus Focus Mode - AUTO : Performs continuous auto-focus. - MANUAL : Changes

English _69● CAMERA SETUPWhite BalanceThe White Balance menu adjusts the balance of the screen colors under different lighting conditions.Main Menu Ö

English _7● OVERVIEWSamsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with m

camera setup70_ camera setupExposureThe Exposure settings are to control the camera’s exposure meter.Main Menu Ö Camera Setting Ö Exposure Brightness

English _71● CAMERA SETUPBack LightBacklight Mode SettingsUnlike other cameras, Samsung Techwin’s unique A1 DSP chip gives you a clear image of the s

camera setup72_ camera setupBLC You can selectively choose a screen area to see objects within the area more clearly than others.Main Menu Ö Camera Se

English _73● CAMERA SETUPDNR (Dynamic Noise Reduction)DNR significantly reduces the amount of low luminance noise.Main Menu Ö Camera Setting Ö DNR O

camera setup74_ camera setupDay/NightThe Day & Night function allows the camera to switch between the Color and B/W modes.Main Menu Ö Camera Setti

English _75● CAMERA SETUPOthersMain Menu Ö Camera Setting Ö Others Sharpness : Sharpens outlines of an image. Freeze : Stops or reanimates an image

camera setup76_ camera setupJog SpeedYou can adjust the pan/tilt speed of the controller in use.Main Menu Ö P/T Setting Ö Jog Speed MANUAL : The angl

English _77● CAMERA SETUPOSD SETTINGOSD SettingOSD Setting is to set up the OSD (On Screen Display) functions.Main Menu Ö OSD Setting Camera ID : Di

camera setup78_ camera setupOSD Setting (Others)Main Menu Ö OSD Setting Ö Others Direction : Indicates the current angle of the camera: East, West, S

English _79● CAMERA SETUPINITIALIZEInitializeMain Menu Ö Initialize Auto Refresh : Enables optimizing the sta-tus of the camera’s built-in electric

overview8_ overviewCONTENTSOVERVIEW33 Important Safety Instructions10 Product Features10 Recomended PC Specifications10 Recomended SDHC/SD Memory C

80_ setup screenSETUPYou can configure the audio & video, network, event and system settings of the camera in the network.1. In the Live screen,

English _81● SETUP SCREENTo add a video profileYou can add as many codecs as necessary so that a variety of profiles can be applied according to the

setup screen82_ setup screenVideo setupTo set the privacy zoneYou can specify a certain area of the camera video to be protected for your privacy.1.

English _83● SETUP SCREENPTZ setupYou can change the direction of lens and activate the zoom.1. Select the <Audio & Video ( )> tab from S

setup screen84_ setup screenTo move a preset1. Select a preset number that you want to move.2. Press the [ ] button.To set the camera operation fo

English _85● SETUP SCREEN3. Set <First preset> and <Second preset> to specify a swing range.4. Set the moving speed and dwell time.5.

setup screen86_ setup screen3. Press the [ ] button.Your settings will be entered in the right list.4. Press the [ ] button.Set data on the righ

English _87● SETUP SCREENTo set the auto runThis will perform the sequence operation that you have specified if no controller manipulation is made fo

setup screen88_ setup screenNETWORK SETUPInterface1. From the Setup menu, select the <Network ( )> tab.2. Click <Interface>.3. Set the

English _89● SETUP SCREENPort1. From the Setup menu, select the <Network ( )> tab.2. Click <Port>.3. Type in each item in the Port me

English _9● OVERVIEWCAMERA SETUP6767 Using the Camera Menu67 Camera Setting77 OSD Setting79 InitializeSETUP SCREEN8080 Setup80 Audio & Video Se

setup screen90_ setup screen - User name : Enter the user name for the DDNS service. (i.e., user ID that is registered with Dyndns) - Password : Enter

English _91● SETUP SCREEN5. Select a <CLASSIFICATION> and specify the <MODEL NUMBER>.6. Specify the product location with a description

setup screen92_ setup screenIP filteringYou can create a list of IPs that you want to grant or deny access to them.1. From the Setup menu, select the

English _93● SETUP SCREENInstalling the certificate1. Enter the certificate name.2. Select the certificate file to be installed and certificate key,

setup screen94_ setup screen E-mail configuration - Server address : Enter the IP address of the email server that you use for the email transfer. ex

English _95● SETUP SCREENTo make recording on the SD memory1. Check the <Total size> and the <Free size>.2. If the SD memory has a suffi

setup screen96_ setup screenAlarm input1/Alarm input2You can set the alarm input type, activation time, and operation mode.1. From the Setup menu, se

English _97● SETUP SCREENVideo analysis1. From the Setup menu, select the <Event ( )> tab.2. Click <Video analysis>.3. Specify the u

setup screen98_ setup screen J  Even if the <Video analysis> is enabled, the video analysis function does not work when entering through the op

English _99● SETUP SCREEN3. Specify the <Transfer interval>.4. Specify the activation conditions. FTP sending : Specify the use of the FTP t