Samsung SND-5011 User Manual download pdf (Page 39)

English _39

●

NETWORK CONNECTION AND SETUP

Setting up Port Range Forward for several network cameras

When several network cameras are connected to one Broadband Router device, you

should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.

If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the

web page of the camera.

• TCP 943 port is a port for the Silverlight policy server of a camera.

• You can set a rule of Port Forwarding on the Broadband Router device through its

configuration web page.

• You cannot change the Silverlight policy server port of a camera.

• You can change the ports of the camera except the policy server port through its

configuration web pages.

When Camera1 and Camera2 are connected to a router :

User

Internet



Broadband Router

Start End Protocol IP Address

943 943 TCP 192.168.1.100

3000 3000 TCP/UDP 192.168.1.100

3001 3001 TCP/UDP 192.168.1.101

4520 4520 TCP/UDP 192.168.1.100

4521 4521 TCP/UDP 192.168.1.101

8080 8080 TCP/UDP 192.168.1.100

8081 8081 TCP/UDP 192.168.1.101



Camera1 (192.168.1.100)

Web Server Port 8080

VNP Port 4520

RTSP Port 3000

Policy Server Port 943



Camera2 (192.168.1.101)

Web Server Port 8081

VNP Port 4521

RTSP Port 3001

Policy Server Port 943



1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 105 106

No comments

Samsung SND-5011 User Manual Page 39