
03 Functions
Listening to the Radio
To Store the Stations You Want
You can store up to15 FM stations.
1.
Select FM by pressing the TUNER button.
2.
To search for a station, press the TUNING
MODE button on the remote control or the
STOP button on the product one or more times
until MANUAL is displayed.
3. Select a station by:
• Pressing and holding the TUNING
1
,
2
button on the remote control to
automatically search for active broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5. If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the MEMORY button.
• FM followed by a flashing number appears in
the display. That number is the current preset
number.
b. Press the
1
,
2
button or the
,
,
.
buttons to scroll through and select a
preset number.
• You can select a number from 1 to 15.
c. Press the
¬
button to save the preset.
6. To store additional radio stations, repeat
Steps 3 to 5.
|
NOTES |
✎
In Tuner mode
• In the Manual mode, you can use the
1
or
2
button to change stations.
• In the Preset mode, you can use the
1
or
2
button to search for a stored radio
station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER button on
the product or remote control.
2. Press the TUNING MODE button on the
remote control until “PRESET” is displayed.
3. Press
1
,
2
button on the main unit or
TUNING
1
,
2
on the remote control to
select a preset number.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK " is displayed.
2. Press the
¬
button on the remote control.
The hour flashes.
• T
o increase the hours:
,
• To decrease the hours:
.
3. When the correct hour is displayed, press the
¬
button, and then the minutes flash.
• To increase the minutes:
,
•
To decrease the minutes:
.
4. When the correct minute is displayed, press
the
¬
button, and then " TIME" appears in
the display.
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be
switched on or off automatically, cancel the
timer by pressing the TIMER ON/OFF button.
21 English
02793H-MX-JS5000-ZC-ENG-20160331.indd 21 2016/4/13 8:52:07
Comments to this Manuals