61
Maintaining your appliance
How to run a self-cleaning cycle
1. Select the length of time for the self-
cleaning operation, eg. 3 hours.
Press Self Clean once for a 3 hour clean
time, twice for a 5 hour clean time, or
3times for a 2 hour clean time.
The default setting is 3 hours.
2. Start the self-cleaning cycle.
Press START/SET. The motor-driven door
lock will engage automatically.
•You will not be able to start a self-
cleaning cycle if the control lockout
feature is activated or if the oven’s
temperature is too hot.
•The oven door locks automatically.
The display will show the clean time
remaining. It is not be possible to open
the oven door until the temperature
drops to a safe/cool temperature.
•The self-cleaning feature will not
operate when the warming center is
on.
3. When the self-cleaning cycle is done, End
will appear in the display and the range
will beep 6 times.
How to delay the start of self-cleaning
1. Press Self Clean.
Select the desired self-clean time by
pressing Self Clean.
2. Press Delay Start.
3. Enter the time you want the clean cycle
to start.
4. Press START/SET.
The display will show Delay, Self clean,
and the Lock icon. The motor-driven door
lock will engage automatically.
5. The Self-Cleaning cycle will turn on
automatically at the set time.
How to turn off the self-cleaning
feature
You may find it necessary to stop or
interrupt a self-cleaning cycle due to smoke
in the oven.
1. Press OFF/CLEAR.
2. You will be able to open the oven door
once the oven has cooled down for
approximately 1 hour.
After a self-cleaning cycle
•You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools. (If white spots remain,
remove them with a soap-filled steel wool
pad and rinse thoroughly with a vinegar
and water mixture.)
•If the oven is not clean after one cycle,
repeat the cycle.
•You cannot set the oven for cooking until
the oven is cool enough for the door to
unlock.
NE59J7850WS_AA_DG68-00600A-01_EN.indd 61 2015-04-23 �� 10:32:07
Comments to this Manuals