Samsung SP-A8000 User Manual download pdf (Page 45)

3-6 Using

3-6-2. Setup

MENU DESCRIPTION

Menu Language Set the menu language.

No Signal Power Off To avoid unnecessary energy consumption, set how long you want the Projector to remain on if it’s

not receiving a signal.

• <Off> - <15min.> - <30min.> - <60min.>

Disabled when a connected PC is in power saving mode.

Install To adjust the picture to the installation location, (for example, behind a semi-transparent screen,

hanging from the ceiling), you can invert the projected images vertically / horizontally.

• <Front-Floor> : Normal Image

• <Front-Ceiling> : Horizontal/Vertical Reversed Image

• <Rear-Floor> : Horizontally Reversed Image

• <Rear-Ceiling> : Vertically Reversed Image

Lamp Mode Using this function, you can set the image brightness by adjusting the amount of light generated by

the lamp.

• <Theater> : This mode is optimized for screens smaller than 100 inches.

This mode decreases the lamp brightness and power consumption to extend the lamp lifetime

and reduce noise and power consumption.

• <Bright> : This mode maximizes the lamp brightness when the ambient illumination is bright. As

the brightness of the lamp increases, the lamp lifetime may be reduced and the noise and power

consumption may increase.

Background You can select an image or screen which will appear when there is no signal from the external device

connected to the projector.

• <Logo> - <Black>

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

No comments

Samsung SP-A8000 User Manual Page 45