Samsung SP-F10 User Manual download pdf (Page 29)

2-12 Installation and Connection

2-12 Connecting an HDMI-Compatible Device

The appearance and the color may differ depending on the model.

Make sure that the AV device and your projector are turned off.

1. Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output

device using an HDMI/DVI or HDMI/HDMI cable.

- If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.

- For supported input signal formats, resolutions, and frequencies, see AV Timing(HDMI) in Section 2-8, "Supported Display

Modes".

2. If you connected using a HDMI/DVI cable, connect the [AV IN (L-AUDIO-R)] terminal on the projector to the Audio out terminal

on your digital output device using an audio cable (Not supplied).

- If you connected with a HDMI/HDMI cable, you do not need an audio cable.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 94 95

No comments

Samsung SP-F10 User Manual Page 29