Samsung FX710BGS/XAA Installation Manual download pdf (Page 24)

24_ installation requirements

SPECIAL GAS REQUIREMENTS (GAS MODELS SOLD IN

MASSACHUSETTS)

COMMONWEALTH OF MASSACHUSETTS REQUIREMENTS:

Gas leaks may occur in your system, creating a dangerous situation.

– Gas leaks may not be detected by smell alone.

– Gas suppliers recommend you purchase and install a UL-approved

gas detector. Gas detector should be installed in accordance with the

manufacturers instructions.

• Range must be installed by a qualiﬁed plumber or gas ﬁtter by the State of

Massachusetts.

• A T-handle manual gas valve MUST be installed in the gas supply line to your

range.

• If a ﬂexible gas connector is used to install your range, multiple ﬂexible gas lines

must not be connected in series.

ELECTRICAL REQUIREMENTS

To reduce the risk of ﬁre, electric shock, or personal injury:

All ranges

• Do not use an extension cord or adapter plug with this range.

• This range must be properly grounded.

• Check with a qualiﬁed electrician if you are in doubt as to whether your range

is properly grounded.

• Do not modify the plug provided with your range—if it doesn¡¯t ﬁt the outlet,

have a proper outlet installed by a qualiﬁed electrician.

• All wiring and grounding must be done in accordance with local codes or, in

the absence of local codes, with the National Electrical Code, ANSI/NFPA No.

70 – Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1

– Latest Revisions and local codes and ordinances.

• Wiring diagram is located on the back of the range. (Inside of the cover back

wire)

• This range is equipped with an electronic ignition system that will not operate

if plugged into an outlet that is not properly polarized.

WARNING

FX710BGS_FX510BGS_DG68-00357A.indd 24 2011-07-12 �� 11:01:01

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

Samsung FX710BGS/XAA Installation Manual Page 24