Samsung DW80H9930US User Manual download pdf (Page 11)

English - 11

Lack of salt indicator (*applicable models only)

- Tu

rns on when the water softener runs out of salt. (or the dishwasher is

in the standby or pause modes.)

- Turns off while the dishwasher is operating.

Delay Start

Delay a cycle for up to 24 hours in one-hour increments. To increase the delay

start time, press or hold the Delay Start button. The hour displayed indicates

the time at which the wash will be started.

- After setting the delay time, press the Start button, and then close the

door to start the cycle.

- If you want to change the delay time once the dishwasher has started,

press the Reset button and turn off the dishwasher. Then, turn on the

dishwasher again and select a new cycle with a new delay setting.

Start

To start a cycle, press the Start button before closing the door.

*Reset : To cancel a currently running cycle and drain the dishwasher, press

and hold the Start button for three (3) seconds.

Once the dishwasher is reset, select a cycle and option, and then press Start

to restart the dishwasher.

You can select options (Self Clean, Upper, Lower, Speed Booster, Sanitize, Dry+, Delay Start) before

starting a cycle. If you change the cycle after selecting an option, the original cycle is reset.

To prevent the touchpad from losing response sensitivity, follow these instructions:

- Touch the center of each keypad using one ﬁ nger. Do not push.

- Clean the touch control’s surface regularly with a soft, damp cloth.

- Be careful not to touch more than one touch key pad at a time, except as directed.

When you pause a cycle by opening the door during operation, press the Start button before closing

the door to continue the cycle.

OO X

03 using your dishwasher

DW80H9950-00149A-03_EN_140811.indd 11DW80H9950-00149A-03_EN_140811.indd 11 2014-08-11  6:25:332014-08-11  6:25:33

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 95 96

No comments

Samsung DW80H9930US User Manual Page 11