
English - 21
Connecting & Setting Up
There are several ways to connect your HDD & DVD
RECORDER. Select the audio connection that best
suits you below.
•
Case 1 : Connecting to your TV
•
Case 2 : Connecting to a stereo amplifier with AV
output jacks
•
Case 3 : Connecting to an AV amplifier with a
digital output jack
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
yellow
white
red
yellow
white
red
Other type of connecting
the Audio output cable
Case 3 : Component Video output
jacks
1. Connect Component video cables (not supplied)
between the COMPONENT OUT(Y,P
B
,P
R
) jacks on
HDD & DVD RECORDER and COMPONENT
IN(Y,P
B
,P
R
) jacks on your TV.
•
You will enjoy high quality and accurate colour
reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD RECORDER
and AUDIO IN jacks on TV (or AV amplifier).
(See pages 21~22).
3. After connecting, refer to the pages 40~41.
green
blue
red
green
blue
red
■
Make sure that the colour coded connections
match. The Y, P
B
, P
R
component output jacks
of your
HDD & DVD RECORDER
must be
connected to the exact corresponding
component input jacks on your TV.
■
Progressive setting is only available when
the
HDD & DVD RECORDER
is connected to
your TV using component cables.
NOTE
2-00819W-XFA_18-23_CONNECT 2005.7.14 10:52 AM Page 21
Comments to this Manuals