Samsung RF22KREDBSG/AA Owner's Manual download pdf (Page 28)

28 English

• Tilt up the front of the drawer and pull straight

out, and pull out the drawer after moving

slightly in the direction of the arrow.

To re-install

• Insert the drawer into the frame rails and push

back into place.

• Slide bin in above the desired location and

push down until it stops.

The drawers need to be removed before

the glass shelf above them can be lifted

out.

5. Flex Zone

To remove the Flex Zone – Pull the Flex door

out to full extension. Lift the Flex Zone up, pulling

it to your body with both hands.

To re-install the Flex Zone – Open the Flex door

to full extension. Tilt the front of the Flex Zone up,

place the back of the Flex Zone onto the rails, and

then lower the front until the whole Zone rests on

the rails.

To remove the divider and the metal cooling

plate from the Flex Zone

1. Slide the divider to the end, and pull it up to

remove as shown.

CAUTION

2. Turn over the drawer to remove the metal

cooling plate.

The Drawer and Metal cooling plate are

heavy.

It may cause a personal injury or material

damage.

To reinsert the metal cooling plate into the

Flex Zone along with the divider – Follow

the removal steps above in the reverse order to

reinsert the metal cooling plate.

Reinsert the divider into the Flex Zone ﬁrmly until

you hear a clicking sound.

When the Flex Zone or LED lighting is not

working, check the connectors [ ( 1 ), ( 2 )

shown below ] for cracks or leaks.

1. Refer to page 12 for disassembly

instructions.

2. Open the cap cover rail with a ﬂat-blade

screwdriver.

CAUTION

RF22KR_DA68-02897B-00_EN.indd 28 2015-12-21  7:51:15

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 111 112

Comments to this Manuals

No comments

Samsung RF22KREDBSG/AA Owner's Manual Page 28

Comments to this Manuals

Related products and manuals for Fridges Samsung RF22KREDBSG/AA