
MAKING MINOR
ADJUSTMENTS TO THE
DOORS
A leveled refrigerator is necessary for getting the
doors perfectly even.
For leveling instructions, review the previous
section on leveling the refrigerator.
Adjustment part
Fixed part
The left door is fixed.
To make minor door adjustments, adjust
only the right door.
1. Pull out the flex door (1) to reveal the lower
hinge (2).
2. Insert a philips screwdriver (+) (3) into the
shaft (4) of the lower hinge.
3. Adjust the height by turning a philips
screwdriver (+) (3) clockwise (
DOWN
) or
counterclockwise (
UP
).
When you turn a philips screwdriver (+)
counterclockwise ( ), the door will
move up.
(3)
(1)
(3)
(2)
(4)
INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a filter is one of the helpful
features on your new refrigerator.
To help promote better health, the water filter
removes unwanted particles from your water.
However, it does not sterilize the water or destroy
microorganisms.
You may need to purchase a water purifying
system to do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
pressure of 20 ~ 125psi (138 ~ 862kPa) is
required.
If the refrigerator is installed in an area with low
water pressure (below 20psi), you can install
a booster pump to compensate for the low
pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly filled.
To do this, press the water dispenser lever until
the water runs from the water outlet.
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and a ¼” compression nut.
English - 16
DA68-03022A-07.indb 16 2015. 11. 6. �� 11:27
Comments to this Manuals