Samsung RF24FSEDBSR User Manual download pdf (Page 11)

( 3 )

Alram

(Hold 3

sec for

Filter

Reset

The Alarm button serves two purposes:

- To turn the door open alarm on and off

- To reset the water ﬁ lter life indicator.

1) Door Alarm Function

If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for

more than three minutes. The beeping stops when you close the door. The door

alarm function is pre-set to On in the factory. You can turn it off by pressing and then

releasing the Alarm button. You can turn it back on in the same fashion. The icon

lights up when the function is on.

When the Door Alarm function is on and the alarm sound is triggered, the Door Alarm

Icon will blink while the alarm sounds.

2) Water Filter Life Indicator Function

After you replace the water ﬁ lter, touch and hold this button for 3 seconds to reset the

water ﬁ lter life indicator. When you reset the water ﬁ lter life indicator, the Filter icon on

the panel turns Off. The Filter icon will turn red to let you know it is time to change the

water ﬁ lter after six months (about 300 gallons). Some areas have large amounts of

lime in their water, which causes the water ﬁ lter to clog more quickly. If this is the case

in your area, you will have to change the ﬁ lter more frequently than every six months.

( 4 )

Lighting

(Hold 3

sec for ºC

↔ ºF)

Lighting button serves two purposes:

- To turn the dispenser light on and off

- To switch the temperature units between ºC and ºF

1) Light Function

Touching the Lighting button turns on the Dispenser LED lamp in continuous mode

so that it stays on continuously. The button also lights up. If you want the Dispenser

lamp to come on only when some one uses the dispenser, press the Lighting button

to turn the continuous mode off.

2) To switch the temperature units between ºC and ºF

Touch and hold this button for 3 seconds to select the temperature display you want.

Each time you press and hold the button, the ºC and ºF temperature modes alternate

and the ºC or ºF icon lights up, indicating your selection.

( 5 )

Fridge

(Hold 3

sec for

Power

Cool)

The Fridge button serves two purposes:

- To set the Fridge to your desired temperature.

- To turn the Power Cool function on and off.

1) To set the Fridge temperature

Press the Fridge button to set the refrigerator to the temperature you want. You can

set the temperature between 7°C and 1°C.

2) Power Cool function

Touch and hold this button for 3 seconds to decrease the time needed to cool

products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled

items or if the temperature in the fridge has warmed dramatically (For example, if the

door was left open).

1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Samsung RF24FSEDBSR User Manual Page 11

Comments to this Manuals

Related products and manuals for Fridges Samsung RF24FSEDBSR