Samsung RF263TE User Manual download pdf (Page 14)

setting up

_14

Connect the household water line to the 1.

assembled compression ﬁtting.

If you are using copper tubing, slip the -

compression nut ( B ) (not supplied) and

ferrule (not supplied) on the copper tubing (not

supplied) as shown.

If you are using plastic tubing ( - B ) , insert the

molded end (Bulb) of the plastic tubing ( B )

into the compression ﬁtting.

Do not use without the molded end (Bulb)

of the plastic tubing ( B ).

Tighten the compression nut ( 2. B ) onto the

compression ﬁtting.

Do not over-tighten the compression nut ( B ) .

Turn water on and check for any leakage. If you 3.

ﬁnd water drops or leakage in the connection

the connections and, if necessary, tighten.

Flush 1 gallon of water through the ﬁlter 4.

before drinking or using the water from the

refrigerator. (Flush approximately 6 minutes.)

To ﬂush, press a large glass or cup against the

water dispenser lever. Fill the glass, empty it

into the kitchen sink after it is ﬁlled, and then

repeat.

After you turn on the refrigerator, let the ice 5.

maker make ice for 1 to 2 days. Over that

period of time, throw out the ﬁrst 1 or 2

buckets of ice the freezer makes to ensure all

impurities have been removed from the water

line.

Only connect the water line to a drinkable

water source.

If you have to repair or disassemble the water line,

get a snug, leak-free connection.

You can test the water line quickly using a

paper cup.Under normal conditions, the water

10 seconds.

COMPLETING THE SET UP

Now that you have your new refrigerator installed

in place, you are ready to set up and enjoy the

features and functions of the appliance.

By completing the following steps, your refrigerator

should be fully operational.

Make sure your refrigerator is in an appropriate 1.

location with reasonable clearance between it

and the wall. Refer to installation instructions in

this manual.

Once the refrigerator is plugged in, make sure 2

the interior light comes on when you open the

doors.

Set the Temperature control to the coldest 3.

temperature and wait for an hour. The freezer

will get slightly chilled and the motor will run

smoothly. Reset the refrigerator and freezer to

the temperatures you want.

After you plug the refrigerator in, it will 4.

take a few hours to reach the appropriate

temperature. You can store food and drinks

in the refrigerator after the temperature is

sufﬁciently cool.

Compression

Nut (1/4”)

(Assembled)

Ferrule

(Not supplied)

Plastic Tubing

(Assembled)

Compression

Fitting

(Assembled)

Molded

end(Bulb)

Compression

nut (B) (1/4”)

(Not supplied)

Copper tubing

(Not supplied)

Plastic tubing (B)

(Not supplied)

Household water supply line

Refrigerator

CAUTION

DA68-02601A(EN+FR+ES)-0.2.indb 11 2012.3.31 9:49:44 AM

In the event of a power failure, call the local ofﬁ ce

of your Electricity Company and ask how long it is

going to last.

Most power failures that are corrected in an -

hour or two will not aect your refrigerator

temperatures. However, you should minimize

the number of door openings while the power

is o.

But Should the power failure last more than -

24hours, remove all frozen food.

If the key is provided with refrigerator, the keys

should be kept out of the reach of children and

not be in the vicinity of the appliance.

The appliance might not operate consistently

(possibility of defrosting of co tents or

temperature becoming too warm in the frozen

food compartment) when sited for an extended

period of time below the cold end of the range of

temperatures for which the refrigerating appliance

is designed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 91 92

Comments to this Manuals

No comments

Samsung RF263TE User Manual Page 14

Comments to this Manuals

Related products and manuals for Fridges Samsung RF263TE