Samsung RF4267HARS User Manual download pdf (Page 19)

Operating _19

02 OPERATING

2. Tempered Glass shelves

To remove - Tilt up the front of the shelf in the

direction shown ( 1 ) and lift it up

vertically ( 2 ). Pull the shelf out.

To relocate - Tilt the front of the shelf up and

guide the shelf hooks into the slots

at a desired height. Then lower the

front of the shelf so that the hooks

can drop into the slots.

The Tempered Glass shelves are heavy.

Use special care when removing them.

3. Vegetable & Fruit Drawers

To remove - Pull the drawer out to full extension.

Tilt up the front of the drawer and

pull straight out.

To relocate - Insert the drawer into the frame rails

and push back into place.

The drawers need to be removed before the

glass shelf above them can be lifted out.

4. Flex Zone

To remove the Flex Zone – Pull the Flex door out

to full extension. Lift the Flex Zone up, pulling it to

your body with both hands.

To relocate the Flex Zone – Open the Flex door to

full extension. Tilt the front of the Flex Zone up,

place the back of the Flex Zone onto the rails,

and then lower the front until the whole Zone

rests on the rails.

When the Flex Zone or LED lighting are not

working, check the connectors [ ( 1 ), ( 2 )

shown below] for cracks or leaks.

1. Refer to page 7 for disassembly instructions.

2. Open the cover housing with a flat-blade

screwdriver.

Using the doors

Ensure that the doors close all the way and are

securely sealed.

When the refrigerator door is only partially open,

CAUTION

DA68-02481A-10.indb 19 13. 4. 25. �� 2:19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

No comments

Samsung RF4267HARS User Manual Page 19