Samsung RF56K9540SR User Manual download pdf (Page 64)

Maintenance

English64

Maintenance

3. Insert a new lter cartridge. Use only

Samsung-provided or -approved lters.

4. Turn the cartridge knob clockwise to

lock into place.

5. On the Home screen, tap Fridge

Manager > Fridge Settings > Water

Filter, and then select RESET.

The lter indicator turns off.

6. When replacing is complete, open the

water valve and run water through the

dispenser for about 7 minutes. This is

to remove impurities and air from the

water line.

NOTE

• A newly installed lter may cause the water dispenser to spurt water briey. This is

because of air entering the waterline.

• This replacement process cause the refrigerator to drip water onto the oor. Simply

wipe up with dry cloths.

Reverse osmosis water ltration system

The water pressure of the water supply system to a reverse osmosis water ltration

system must be between 35 psi and 120 psi (241 kPa and 827 kPa).

The water pressure of the reverse osmosis water ltration system to the refrigerator’s

cold water line must be at least 40 psi (276 kPa). If the water pressure is below the

specied:

• Check if the sediment lter in the reverse osmosis system is blocked. Replace the lter

if necessary.

• Rell the water tank in the reverse osmosis system with water.

• If your refrigerator has a water lter, it may further reduce the water pressure when

used in conjunction with a reverse osmosis system. Remove the water lter.

For more information or servicing, contact a licensed plumbing professional.

Untitled-3 64 2017-01-12  12:09:06

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71 72

No comments

Samsung RF56K9540SR User Manual Page 64