Samsung RH25H5613SL User Manual download pdf (Page 18)

English - 18

How to install the handles

Using a Philips head screwdriver, attach ﬁxer

screws to the screw holes on each door.

If your refrigerator already has the ﬁxer screws

installed, skip this step.

Orient each handle so that the end with the sticker

attached is at the top and the holes for the screws

are facing the screw holes on the refrigerator door.

Place a handle over the ﬁxer screws on one door,

and then slide the handle down ﬁrmly.

Repeat with the second handle on the other door.

For Models with a lever attached to the right

handle, push the lever button on the handle in,

hold it in place, and then slide the bottom of the

handle down over the ﬁxer screw.

Fix the handles to the doors

by sliding them down ﬁrmly.

( 1 )

( 3 )( 2 )

Using the include hex wrench, tighten the set

screw on the top inside section of each handle.

Use the longer part of the hex wrench to begin

tightening, and then the shorter part to tighten the

screw fully, as shown in the diagram below.

( 4 ) ( 5 )

REMOVING THE REFRIGERATOR

DOORS

If your entrance won’t allow the refrigerator to pass

easily through it, you can remove the refrigerator

doors.

To remove the doors, follow the steps below.

If you do not need to remove the doors, go to

“Leveling the Refrigerator” on page 21.

Tools You’ll Need

Philips

Screwdriver

Flat-blade

Screwdriver

10mm Socket

Wrench

1. Remove the Front Leg Cover

Open both the freezer and refrigerator doors.

Unscrew the three screws holding the front leg

cover in place by turning them counter-clockwise.

When the screws are loose, remove the front leg

cover.

Screw

Front leg cover

When disassembling, make sure the unit

is turned off.

CAUTION

SSEDA FSR-1 EN-��.indd 18 14. 11. 28. �� 1:11

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

Comments to this Manuals

No comments

Samsung RH25H5613SL User Manual Page 18

Comments to this Manuals

Related products and manuals for Fridges Samsung RH25H5613SL