28
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
Adjustment part
2) Please adjust the height difference between the doors turning
the bolt (➁) turn clockwise ( ) or counter clockwise
( ).
If the door of freezer is higher than that of the refrigerator.
Please open the doors and adjust the doors as follows:
1) Release the nut (①) on the lower hinge until the upper end
of the bolt (➁).
NOTE
When you release the nut(
①
), use enclosed hex wrench (
➂
) to turn
the bolt(
➁
) a little counter clockwise to make the nut(
①
) loose with
your fingers.
NOTE
When you turn clockwise ( ), the door goes up.
➂ WRENCH
➀ NUT
➁ BOLT
NOTE
If you do not fix the nut (
①
) firmly, the bolt (
➁
) may be released.
3) After adjusting the doors, turn the nut (①) turn clockwise
( ) until the lower end of the bolt, then tighten
the bolt again with the wrench (➂) to fix the nut(①).
➂ WRENCH
➁ BOLT
➂ WRENCH
➁ BOLT
➀ NUT
DA99-01011A (EN1)-0.2 5/31/06 12:18 PM Page 28
Comments to this Manuals