Samsung SRF867FSBLS User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
English 55
Troubleshooting
Symptom Action
The front corners
and sides become
warm and form
condensation.
To prevent condensation from forming, the refrigerator
has heat-proof piping in the front corners. If the ambient
temperature rises, this equipment may not work effectively.
This is not a system failure.
Make sure the door is closed properly. Condensation may
form if you leave the door open for some time.
Condensation may form on the exterior surface of the
refrigerator if humid air comes into contact with the cool
surface of the refrigerator.
The ice maker does
not make ice.
At rst-time use of the refrigerator, the ice maker can
produce ice about 12 hours after the refrigerator turned on.
Make sure the water line is properly connected and the shut-
off valve is open.
Make sure the ice making function is not stopped manually.
Make sure the freezer is set below 0 °C (or -5 °C in warm
ambient air).
The water dispenser
is not functioning.
Make sure the water line is properly connected and the shut-
off valve is open.
Make sure the water supply line tubing is not damaged such
as crushed or kinked.
You hear a bubbling
sound.
This is normal. The bubbling sound comes from refrigerant
circulating through the refrigerator.
A bad smell comes
from inside the
refrigerator.
Check for any spoiled food. We recommend cleaning the
refrigerator on a regular basis and removing any spoiled or
suspect food items.
Make sure strong smelling food is wrapped up airtight.
Frost forms on the
interior walls.
Make sure the air vents are not blocked by food or any other
objects so that the air can circulate freely. For efcient air
circulation, it is recommended to arrange food items evenly.
Make sure the door is closed properly.
Condensation or
water drops form on
or around the vertical
mullion.
While the refrigerator is operating, condensation or water
drops may form on or around the vertical mullion if the
surrounding humidity is too high.
Untitled-1 55 2016-09-29  7:40:46
Page view 54
1 ... 54 55 56 57 58 59 60

Comments to this Manuals

No comments