Samsung NP905S3G User Manual download pdf (Page 74)

Chapter 3.

Using the computer

Wired Network

Congure the IP settings.

When using DHCP, select Obtain an IP address

automatically. To use a static IP address, select Use the

following IP address, and set the IP address manually.

When not using DHCP, ask your network administrator for the

IP address.

When you have completed the settings, click the OK button.

The network settings have been completed.

Using the WOL (Wake On LAN) function

<Wake On LAN> is a function that activates the system from Sleep

mode when a signal (such as a ping or magic packet command)

arrives over the network (wired LAN).

Click Charms menu on the Desktop > Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

Control Panel > Network and Internet > Network and

Sharing Center and click on Change adapter settings in

the left menu pane.

Right-click on the Wired Ethernet Connection and select

Properties.

Click Congure > Power Management tab. Select Allow

this device to wake the computer, then click OK. Restart

the system.

- If the system wakes up from Sleep mode even though there

is no received signal, use the system after disabling the

<Wake On LAN> function.

Connecting a wired LAN while using a wireless LAN may not

activate the

<Wake On LAN> function. Set the Wireless LAN

to Disable to use the <Wake On LAN> function.

- <Wake On LAN> feature may not work while using Hybrid

power saving feature. Hybrid sleep mode can be disabled

from Power Options under Control Panel.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 144 145

No comments

Samsung NP905S3G User Manual Page 74