Samsung CLP-365 User's Guide download pdf (Page 111)

Wireless network setup

111

2. Using a network-connected machine

You can change the WPS mode in control panel ( (Menu) > Network >

Wireless > OK > WPS Setting).

Machines with a display screen

Connecting in PBC mode

Press and hold the (WPS) button on the control panel for more than

2 seconds.

The machine starts waiting for up to two minutes until you press the WPS

(PBC) button on the access point (or wireless router).

Press the WPS (PBC) button on the access point (or wireless router).

The messages are displayed on the display screen in the order below:

a Connecting: The machine is connecting to the access point (or

wireless router).

b Connected: When the machine is successfully connected to the

wireless network, the WPS LED light stays on.

c AP SSID: After completing the wireless network connection process,

the AP’s SSID information appears on the display.

Insert the supplied software CD into your CD-ROM drive, and follow the

instructions in the window to set up the wireless network.

Connecting in PIN mode

Press and hold the (WPS) button on the control panel for more than

2 seconds.

The eight-digit PIN appears on the display.

You need to enter the eight-digit PIN within two minutes on the

computer that is connected to the access point (or wireless router).

The messages are displayed on the display screen in the order below:

a Connecting: The machine is connecting to the wireless network.

b Connected: When the machine is successfully connected to the

wireless network, the WPS LED light stays on.

c SSID Type: After completing the wireless network connection

process, the AP’s SSID information is displayed on the LCD display.

Insert the supplied software CD into your CD-ROM drive, and follow the

instructions in the window to set up the wireless network.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 234 235

No comments

Samsung CLP-365 User's Guide Page 111