Samsung 2232MW User Manual

SyncMaster 2232MWLCD Monitorquick start guide

18. SOURCE - Adjustablewhen the PIP function is ON.Selects the Video SOURCE.19. DUAL I-II STEREO/MONO, DUAL l / DUAL ll and MONO/NICAMMONO/NICAM STERE

ConnectionsConnecting the monitor1. Connecting to a Computer Connect the power cord for your monitor to the power port on the back of the monitor.Plug

2. Connecting to a Macintosh1. Using the D-sub (Analog) connector on the video card.•Connect the signal cable to the D-SUB port on the back of your mo

3. Connect your headphones to the Headphone connection terminal.4.Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.5. Select AV

1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of themonitor.2. Connect the VIDEO OUT port of the DVD / DTV Set-T

Connecting Using a DVI to HDMI Cable1. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of themonitor using a DVI

TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for service. Contact the service center for problemsthat

If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot installthe monitor driver.1.Checking Adapter Drive

1. Check if the power cord and the video cables are properly connected to the computer.2. Check if the computer beeps more than 3 times when booting.(

Q: Screen is blank and power indicator is off.A: Ensure that the power cord is firmly connected and the LCD monitor is on.(Refer to the Con-necting th

IntroductionPackage Contents NotePlease make sure the following items are included with your monitor.If any items are missing, contact your dealer.Con

A: If you see the "TEST GOOD" message on the screen when you press the MENU button, checkthe cable connection between the monitor and the co

Set the resolution in the Control Panel → Display → Settings.* Contact the video card manufacturer for details.Q: How can I set the Power Saving funct

OthersRemote Control Batteries (AAA X 2)(Not available in all loca-tions)Cleaning ClothSold separatelyHDMI Cable DVI to HDMI Cable Earphones/Headphone

Your MonitorFrontSOURCEActivates a highlighted menu item.Push the 'SOURCE', button to change the input signal source.Changing the source is

This will enable you to see the overall power status of the system. For more in-formation, see the PowerSaver section.SpeakerYou can hear sound by con

1. PC: Connect the signal cable to the PC port onthe back of your monitor.2. DVI-D: Connect the DVI cable to the DVI-D porton the back of your monitor

The Kensington lock is a device used to phys-ically fix the system when using it in a publicplace.(The locking device has to be purchased sepa-rately

POWERNumber button-/-- MENU MUTE Up-Down Left-Right buttons ENTER INFO SOURCEPRE-CH P EXITP.MODE, M/B (MagicBright‚)S.MODESTILLP.SIZESOURCEDUAL I-II

7. Up-Down Left-Right buttonsMoves from one menu item to another horizontally, vertically oradjusts selected menu values.8. ENTERActivates a highli