Samsung HG46NA590 Installation Manual download pdf (Page 12)

English

Connecting to a Network

You can set up your TV so that it can access SMART TV applications through your local area network (LAN) using a wired or

wireless connection.

✎

After you have “physically” connected your TV to your network, you must configure the network connection to complete

the process. You can configure the connection during the Initial Setup process (see page 30) or after the Initial Setup

process, through the TV’s menu.

Network Connection - Wireless

You can connect your TV to your local area network (LAN) through a standard wireless router or modem.

This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When

you play video over a network connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access

point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key.

Your TV is compatible with the following security protocols:

y Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK

y Encryption Type: WEP, TKIP, AES

If you select Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption type is set to WEP or TKIP on your AP or

wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certiﬁcation speciﬁcations.

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless IP Router or Modem

(router having DHCP Server)

[HG590790-ZA]ENG.indd 12 2012-03-22 오후 3:47:24

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

No comments

Samsung HG46NA590 Installation Manual Page 12