Samsung LNS2352W Specifications download pdf (Page 26)

English-24

Setting up the TV with your PC

Image Lock:

The purpose of picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse)

and Fine-tune again.

After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

1. Press the MENU button to display the menu.

Press the

 or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “PC”, then press the ENTER button.

3. Press the ENTER button to select “Image Lock”.

4. Press the  or  button to select “Coarse” or “Fine”, then press the ENTER button.

5. Press the  or  button to adjust the screen quality, vertical stripes may appear or the

picture may be blurry.

Press the

ENTER button.

6. Press the EXIT button to exit.

Position:

Adjust the PC’s screen positioning if it does not fit the TV screen.

1. Press the MENU button to display the menu.

Press the

 or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “PC”, then press the ENTER button.

3. Press the  or  button to select “Position”, then press the ENTER button.

4. Press the  or  button to adjust the V-Position (Vertical-Position).

Press the

 or  button to adjust the H-Position (Horizontal-Position).

Press the

ENTER button.

5. Press the EXIT button to exit.

Image Reset:

You can replace all image settings with the factory default values.

1. Press the MENU button to display the menu.

Press the

 or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “PC”, then press the ENTER button.

3. Press the  or  button to select “Image Reset”, then press the ENTER button.

4. Press the EXIT button to exit.

Auto Adjustment:

Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal.

The fine, coarse and position values are adjusted automatically.

1. Press the MENU button to display the menu.

Press the

 or  button to select “Setup”, then press the ENTER button.

2. Press the  or  button to select “PC”, then press the ENTER button.

3. Press the  or  button to select “Auto Adjustment”, then press the ENTER button.

4. Press the EXIT button to exit.

BN68-00998B-00Eng.qxd 3/7/06 2:55 AM Page 24

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 76 77

Comments to this Manuals

No comments

Samsung LNS2352W Specifications Page 26

Comments to this Manuals

Related products and manuals for LCD TVs Samsung LNS2352W