Samsung PS63B680T6W User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 284
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
English - 35
Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by
using
a peer to peer network.
How to connect to new Ad-hoc
1. Choose Select a network, then a device list is displayed.
2. While in the device list, press the Blue button on the remote or select Ad-hoc.
The message The existing network system may have limited functionality.
Do you want to change the network connection? is displayed.
3. Input the generated Network Name(SSID) and Security Key into the device you
want to connect.
How to connect an existing Ad-hoc device
1. Choose Select a network, the device list is displayed.
2. Select the device you want in the Device list.
3. If security key was applied, input the security key again.
If network doesn’t operate normally, please check the Network Name(SSID) and Security Key again.
If the Security Key is incorrect, it may be the reason for the malfunction.
Wireless Network Setup - Auto
If you want to connect AP, AP should support DHCP.
Only devices which support Ad-hoc mode can be connected without DHCP.
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Auto.
The Internet Protocol is set automatically.
4. Select a network through Select a network.
5. Select Network Test to check the network connectivity.
Wireless Network Setup - Manual
To connect the network wirelessly using a static IP address, you must set up the Internet Protocol (IP). (See page 32)
For more detailed information of static IP address, refer to the user manual of your wireless IP sharer.
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Manual.
4. Set up IP Address, Subnet Mask, Gateway and DNS Server.
Press the number buttons on the remote control when you set the Network manually.
5. Select a network through Select a network.
6. Select Network Test to check the network connectivity.
N
N
N
N
N
*
The existing network system may have limited
functionality. Do you want to change the network
connection?
No
Yes
BN68-02113E-Eng.indb 35 2009-04-09 오후 3:54:12
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 283 284

Comments to this Manuals

No comments