Samsung T24B301LR User Manual download pdf (Page 21)

English

Basic Features

Channel Menu

¦ Retuning Channels

→ Channel → ENTER

Antenna (Air / Cable)

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the LED display.

Auto Program

✎

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. If

a channel is locked using the Channel Lock function, the

PIN input window appears.

■ Auto Program

– Air / Cable: Select the antenna source to memorise.

Fine Tune

If the reception is clear, you do not have to ﬁne tune the channel,

as this is done automatically during the search and store

operation. If the signal is weak or distorted, ﬁne tune the channel

manually. Scroll to the left or right until the image is clear.

✎

Settings are applied to the channel you’re currently

watching.

✎

Fine tuned channels that have been saved are marked

with an asterisk “*” on the right-hand side of the channel

number in the channel banner

✎

To reset the fine-tuning, select Reset.

Crosstalk Noise Reduction(Off/On)

This function reduce diagonal noise in picture caused by the

crosstalk of signals. If your TV displays with a noise while

watching TV, turns on this function.

Color System (Auto / PAL-M / PAL-N /

NTSC)

Normally the TV can receive image and sound with good quality

when in the mode auto. This mode detects the signal color

system automatically. In case of some signal reception with

color unsatisfactory, select the Color System mode to Auto,

PAL-M, PAL-N or NTSC.

Picture Menu

¦ Changing the Preset Picture Mode

→ Picture → Picture Mode → ENTER

Picture Mode

Select your preferred picture type.

✎

When connecting a PC, the Picture Mode is only available

the Standard and Entertain.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal environment.

■ Movie: Suitable for watching movies in a dark room.

■ Entertain: Suitable for watching movies and games.

✎

It is only available when connecting a PC.

¦ Adjusting Picture Settings

→ Picture → ENTER

Samsung MagicAngle

Adjust screen viewing Angle to optimize screen quality

according to your viewing position.

■ Samsung MagicAngle: When viewing the screen at an

angle from below or above by setting the appropriate mode

for each position you can obtain a similar picture quality as

viewing the screen directly from the front.

Off: Select when viewing from the front position.

Lean back mode: Select when viewing from a slightly

lower position.

Standing Mode: Select when viewing from the upper

position.

■ Mode: Adjust screen viewing angle.

✎

When Samsung MagicAngle is set to Lean back mode

or Standing Mode, Gamma is not available.

Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

When connecting a PC, you can only make changes to

Backlight, Contrast, Brightness and Sharpness.

Settings can be adjusted and stored for each external

device connected to the LED display.

Lowering picture brightness reduces power

consumption.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Comments to this Manuals

No comments

Samsung T24B301LR User Manual Page 21

Comments to this Manuals

Related products and manuals for LCD TVs Samsung T24B301LR