Samsung UA55HU9000R User Manual Page 127

  • Download
  • Add to my manuals
  • Print
  • Page
    / 193
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 126
120 121
Changing the 3D Mode
Picture > 3D > 3D Mode
Try Now
1.
Launch 3D and then select 3D Mode under Picture > 3D.
2.
Choose from the 3D modes that appear on the screen. Supported 3D Mode may vary depending
on the 3D content.
"
3D Mode is automatically configured for most 3D content.
The following 3D Mode is available. However, mode availability may vary depending on the 3D
content's format.
"
The supported resolutions vary for each mode. Refer to the "Supported Resolutions for each 3D Mode"
section for more information.
(Off)
Deactivates 3D viewing.
(Normal)
Converts normal images to 3D images.
"
Some formats do not support this mode.
(L/R)
Splits a single image into left and right overlapping images to create the 3D effect.
(T/B)
Splits a single image into top and bottom overlapping images to create the 3D effect.
(Horizontal Line)
Switches between left and right images one horizontal line at a time.
(Vertical Line)
Switches between left and right images one vertical line at a time.
(Pixel)
Switches between left and right images one pixel at a time.
(Frame)
Switches between left and right images one frame at a time.
When the TV is connected to a computer:
"
The (Horizontal Line), (Vertical Line), and (Pixel) settings can only be selected when the
computer's resolution is set to 1920x1080 ,or the computer is connected to the TV via an HDMI-DVI cable.
"
The (Frame) setting can only be selected when the computer's resolution is set to 1920x1080 and the
frequency to 60Hz.
Page view 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 192 193

Comments to this Manuals

No comments