Samsung SM700DXn Specifications download pdf (Page 116)

Main Icons Select Button

Remocon Info Grid

Safety Lock Display Selection

Port Selection Control Tools

1. Use the main icons to switch into each screen.

2. Allows you to enable or disable the remote control signal receiving function of the display unit.

3. Set the Safety Lock function.

When setting the Lock function, you can only operate power and lock buttons on the remote control and set.

4. The setting for the PC Serial Port can change. The original value is COM1.

5. Click Select all or Clear to select or clear all displays.

6. Use Grid to view brief information on selected display.

7. Select a display from Display Selection.

8. Use Control Tools to control displays.

<Note> The remote control Enable/Disable function operates whether or not the power is On/Off, and this

applies to all displays connected to the MDC. However, regardless of the status at the time the MDC is

shut down, the remote control signal receiving function of all displays is initialized to Enable when the

MDC is closed.

Port Selection

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 169 170

No comments

Samsung SM700DXn Specifications Page 116