Samsung SyncMaster 943T User Manual

SyncMaster 943TLCD MonitorUser Manualimagine the possibilities

CablesD-Sub Cable Power Cord DVI Cable (option)Others Cleaning Cloth NoteThis is only provided for highly polished black products as a product f

FrontMENU button [MENU/ ]Opens the on-screen menu and exits from the menu. Also use to exit the OSD menuor return to the previous menu.Customized Key[

NoteIf you select the digital mode, you must connect your monitor to the graphic card'sDVI port using the DVI cable.>> Click here to see a

Connect the D-sub cable to the 15-pin, RGB IN port on the back of your monitor.Kensington LockThe Kensington lock is a device used to physically fix t

ConnectionsConnecting Cables Connect the power cord for your monitor to the power port on the back of the monitor.Plug the power cord for the monitor

Using the StandMonitor AssemblySimple Stand HAS StandMonitor and BottomHAS StandA. Stand StopperAttaching a BaseThis monitor accepts a 75 mm x 75 mm V

Simple Stand HAS StandA. MonitorB. Mounting interface pad (Sold separately)1. Turn off your monitor and unplug its power cord.2. Lay the LCD monitor f

Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROMincluded with this monitor. Driver

NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage your system.The certified driver will be posted on Sam

NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage your system.The certified driver will be posted on Sam

Safety InstructionsNotational NotePlease read the following safety instructions as they are designed to prevent damage to property andharm to the user

9. Select the model that matches your monitor from the list of monitor models on the screen, andclick "Next". 10. Click "Close" →

1. Insert CD into the CD-ROM drive.2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon.3. Cli

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the modellist and click the "Next" button.

10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you

4. Select the "Monitor" tab.5. Click the "Change" button in the "Monitor Type" area.6. Choose "Specify the location

Natural ColorNatural Color Software ProgramOne of the recent problems in using a computer is that the color of the images printed out by a printeror o

Installation1. Insert the installation CD into the CD-ROM drive.2. Click the MagicTune™ installation file. NoteIf the popup window to install the soft

UninstallThe MagicTune™ program can be removed only by using the "Add or Remove Programs" option ofthe Windows® Control Panel.Perform the fo

6. Choose a folder to install the MagicRotation program.7. Click "Install".8. The "Setup Status" window appears.9. Click "Fin

• Windows NT 4.0• Windows 2000• Windows XP Home Edition• Windows XP Professional• Windows Vista™Hardware• 128 MB Memory above (recommended)• 25 MB Har

Do not excessively bend the plug and wire nor place heavy objectsupon them, which could cause damage.• This may cause electric shock or fire. Do not

Adjusting the MonitorDirect FunctionsAUTOWhen the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the animatedscree

When pressing the MENU button after locking the OSDThis is the function that locks the OSD in order to keep the current states of settings or prevent

NoteThough the OSD adjustment lock function is activated, you can still adjust the brightness and contrast,and adjust Customized Key ( ) using the Di

BrightnessWhen OSD is not on the screen, push the Brightness ( ) button to adjust brightness.SOURCESelects the video signal while the OSD is off.Adjus

OSD FunctionPicture Brightness Contrast MagicBrightColor MagicColor Color Tone Color Con-trolColor Effect GammaImage Coarse Fine Sharpness H-Position

You can use the on-screen menus to change the contrast according to personal preference.( Not available in MagicColor mode of Full and Intelligent. )M

Game, Sport, Movie and Dynamic Contrast. Each mode has its own pre-configured brightness value.You can easily select one of seven settings by simply p

MagicColorMagicColor is a new technology that Samsung has exclusively developed to improve digital imageand to display natural color more clearly with

Color ToneThe tone of the color can be changed and one of four modes can be selected.• Cool - Makes whites bluish.• Normal - Keeps whites white.• Warm

Color ControlAdjusts individual Red, Green, Blue color balance.( Not available in MagicColor mode of Full and Intelligent. )MENU → , → → , →

Do not place the product on the floor.• Take care, as someone, specifically children may trip over it. TO PREVENT THE SPREAD OF FIRE, KEEP CA

• Off • Grayscale • Green • Aqua • Sepia• Off - This applies an achromatic color to the screen to adjust the screen effects.• Grayscale - The default

ImageCoarseRemoves noise such as vertical stripes.Coarse adjustment may move the screen image area. You may relocate it to the center usi

FineRemoves noise such as horizontal stripes.If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).(Avai

( Not available in MagicColor mode of Full and Intelligent. )MENU → , → → , → → , → MENUH-PositionChanges the horizontal position of th

Changes the vertical position of the monitor's entire display.(Available in Analog mode only)MENU → , → → , → → , → MENU OSDLangu

H-PositionYou can change the horizontal position where the OSD menu appears on your monitor.MENU → , → → , → → , → MENUV-PositionYou c

TransparencyChange the transparency of the background of the OSD.• Off • OnMENU → , → → , → → , → MENUDisplay TimeThe menu will be aut

• 5 sec • 10 sec • 20 sec • 200 secMENU → , → → , → → , → MENU SetupResetReverts the product settings to factory defaults.• No • YesME

Customized KeyYou can specify a function which will be activated when the Customized Key ( )is pressed.MENU → , → → , → → , →MENUOff Ti

MENU → , → → , → → , → → , → MENUAuto SourceSelect Auto Source for the monitor to automatically select the signal source.• Auto •

Do not spray water or detergent directly onto the monitor.• This may cause damage, electric shock or fire. Use the recommended detergent with a smoot

Shows a video source, display mode on the OSD screen.MENU → , →MENUAdjusting the Monitor49

TroubleshootingSelf-Test Feature Check NoteYour monitor provides a self test feature that allows you to check whether your monitor is functioningprope

Judging the monitor's working conditionIf there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1280 x 102460

but the "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" message appearsfor one minute and then disappears.Please change t

The screen is out of focus or OSD cannot be adjusted.Q: Have you adjusted the resolution or frequency on the monitor?A: Adjust the resolution and freq

MagicTune™ doesn't work properly.Q: Have you changed your PC or video graphic card?A: Download the latest program. The program can be downloaded

Q: How can I set the Power Saving function?A: Windows XP:Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver.Set

SpecificationsGeneralGeneralModel Name SyncMaster 943TLCD PanelSize 19 inch (48 cm)Display area 376.32 mm (H) x 301.06 mm (V)Pixel Pitch 0.294 mm (H)

Dimensions (W x H x D) / Weight (HAS Stand)405.6 x 380.2 x 190.0 mm / 16.0 x 15.0 x 7.5 inch (With Stand), 4.85 kg / 10.7 lbsVESA Mounting Interface75

This monitor is EPA ENERGY STAR® compliant and EN-ERGY2000 compliant when used with a computer equippedwith VESA DPM functionality.As an ENERGY S

Do not try to move the monitor by pulling only the wire or the signalcable.• This may cause a breakdown, electric shock or fire due to damage tothe c

InformationFor Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computeras described below to enjoy the b

when switching to a new video image. All display products, including LCD, are subject toimage retention. This is not a product defect.Please follow th

Ex)• Every 30 minutes, change the characters with movement.Ex) The best way to protect your monitor from Image retention is to set your PC or Systemto

Our LCD Monitor satisfies ISO13406-2 Pixel fault Class IIInformation62

AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact the SAMSUNGcustomer care cent

EuropeITALIA 800-SAMSUNG(726-7864) http://www.samsung.com/itLUXEMBURG 0035 (0)2 261 03 710 http://www.samsung.com/beNETHERLANDS 0900 SAMSUNG(726-7864

Middle East & AfricaSOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com/zaTURKEY 444 77 11 http://www.samsung.com.trU.A.E 800-SAMSUNG(726-7

Correct DisposalCorrect Disposal of This Product (Waste Electrical & Electronic Equipment) -Europe only(Applicable in the European Un

To ease eye strain, take at least a five-minute break after every hourof using the monitor. Do not install the product on an unstable, uneven surface

• Keep the angle of the elbow perpendicular.• Keep the angle of the knees at more than 90 degree. Donot let your feet fall up from the floor. Adjust t

IntroductionPackage Contents NotePlease make sure the following items are included with your monitor.If any items are missing, contact your dealer.Con