Samsung WAM751 Datasheet download pdf (Page 44)

❚

Adding another M7 and Hub to a single M7 in use

When the M7 in use is connected to the router with a LAN cable

1 Disconnect the LAN cable from the M7 in use.

2 Connect the HUB to the wireless router with the LAN cable, and then plug in the

HUB's power cable.

3 Plug in the power cable of the new M7. The new M7's blue LED pairing indicator starts

to flash. Wait until the pairing indicator on the M7 stops flashing. When the indicator

stops flashing, pairing is complete. The M7 may also beep.

4 Turn off the old M7 by disconnecting the power cable. Then. connect it again.

Press the SPK ADD button on the back of the M7. The M7's blue LED pairing

indicator starts to flash. Wait until the pairing indicator on the M7 stops flashing. When

the indicator stops flashing, pairing is complete. The M7 may also beep.

5 On your smart device, select the Samsung Multiroom app. Setup starts.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 74 75

No comments

Samsung WAM751 Datasheet Page 44