Samsung SCH-100 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 41
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
70 71
Before contacting an authorized service center,
perform the following simple checks. They may
save you the time and expense of an unnecessary
service call.
Troubleshooting
NOSVC is displayed in the display.
Make sure you are in the service area.
If you have changed the service system, wait for about 2
minutes.
Make sure you have chosen correct service system mode
Sometimes, NOSVC indication appears briefly. It is normal.
Beep tone sounds when you make a call.
The call is not made successfully.
When beep tone sounds, press SEND again so that the
number is redialed automatically.
To cancel automatic redial, press END.
Ringer bell does not sound and receiving lamp flickers.
You have set the phone to the lamp mode.
LOCKED is displayed and you cannot make a call.
The phone is locked.
Press lock code (Default:0000)
If you forgot the lock code, consult with the service center.
Battery usage time is different with that of this manual.
If you use analog or digital mode alternately, the usage time
may be reduced.
After charging, please store battery in a cool, dry place.
The phone does not turn on, even though the battery is full.
Remove battery from the phone and reattach it.
Nothing is displayed
Check that the battery pack has been charged and installed
correctly.
Check that the phone has been switched on (PWR button
pressed for more than one second).
You have entered a number but does not dial.
Have you pressed the SEND button?
Is the cellular phone service currently available (Svc
displayed)?
Are you accessing the right cellular network (if the phone is
programmed for dual network use)?
Your party cannot reach you
Is your phone switched on (PWR button pressed for more
than one second)?
Are you accessing the right cellular network (if the phone is
programmed for dual network use)?
Your party cannot hear you speaking
Have you switched off the microphone (MUTE displayed)?
Are you holding the phone close enough to your mouth? The
microphone is located at the bottom of the phone.
The phone starts beeping and flashes on the display
The battery pack is insufficiently charged. Replace the pack
and recharge it fully until the lamp on the charger turns green.
Miscellaneous
Miscellaneous
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments