Samsung LS30HUXCB-XAA User Manual

iiLCD MONITORquick start guide305TPLUS

you to mount the monitor at least 10 cm away from the wall surface. zContact the nearest Samsung Service Center for more information. Samsung Electro

Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assist

LED is blinking but no images on the screen.Is the frequency properly adjusted when checking the Display Timing on the menu?Adjust the frequency prop

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealerto buy

DVI-D (Dual link) Cable Power Cord Sold separately USB Cable (A-B Type cable) Front 1. Brightness button [] Push the button to adj

(The configuration at the back of the monitor may vary from product to product.) 1. DOWN : Connect the DOWN port of the USB monitor and a U

Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. See Connecting the Monitor for further information rega

Connecting the Monitor 1.Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor

Data Rate 480 Mbps 12 Mbps 1.5 MbpsPower Consumption2.5W (Max., each port)2.5W (Max., each port)2.5W (Max., each port) Connect the UP port of

zWhen connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cab

Using ( ), You can adjust the tilt anlgle within a range of 3° forward to 25° backward for the most comfortable viewing angle. Attaching a Bas