Samsung CLX-3175 User's Guide Page 153

  • Download
  • Add to my manuals
  • Print
  • Page
    / 218
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 152
Troubleshooting_56
Paper Jam 2
Check Inside
Paper has jammed In
the fuser area or
around the toner
cartridge
Clear the jam. (See "In
the paper exit area" on
page 53.)
Refilled Toner
T
The toner cartridge
you have installed is
not genuine or refilled.
The arrow indicates
which color toner
cartridge.
The print quality may get
poor if the refilled toner
cartridge is installed,
since its characteristics
may significantly differ
from the genuine. We
recommend Samsung-
genuine color toner
cartridge.
Replace Toner
T
This message
appears between
Toner Empty and
Toner Low status.
Replace the toner
cartridge with a new one.
(See "Replacing the
toner cartridge" on
page 48.)
Replace
[xxx]
The life of the part
expires totally.
Replace the part with a
new one. Call for
service.
Replace
[xxx] Soon
The life of the part
expires soon.
See "Checking
replaceables" on
page 51 and call for
service.
Replace/Install
Toner Waste Bin
The life span of the
waste toner tank has
expired and the printer
will stop printing until
a new waste toner
tank is placed into the
machine.
Replace the waste toner
bank with a new one.
(See "Replacing the
waste toner
container" on page 50.)
Scan Unit Open The scan unit is not
securely latched.
Close the scan unit it
locks into place.
Scanner locked The scanner module
is locked
Turn the power switch
off and on. If the problem
persists, call for service.
Send Error
(AUTH)
There is a problem in
SMTP authentication.
Configure the
authentication setting.
Send Error
(DNS)
There is a problem in
DNS.
Configure the DNS
setting.
Send Error
(POP3)
There is a problem in
POP3.
Configure the POP3
setting.
Send Error
(SMTP)
There is a problem in
SMTP.
Change to the available
server.
Send Error
(Wrong Config)
There is a problem on
the network interface
card.
Configure your network
interface card correctly.
[Stop Pressed] Stop/Clear has been
pressed during an
operation.
Try again.
MESSAGE MEANING
SUGGESTED
SOLUTIONS
Toner Empty
T
A toner cartridge has
almost reached its
estimated cartridge
life.
Press OK to toggle
the message to Stop
or Continue or Black
Only.
W Stop X
If the black
toner cartridge
is empty,
Black Only
message does
not appear.
You can select the
option among Stop,
Continue or Black Only
with the left/right arrow.
If you select Stop by
pressing OK on the
control panel, the
machine stops printing.
If you select Continue,
the machine keeps
printing, but the quality
cannot be guaranteed.
If you select Black Only,
the machine prints the
data in black. In this
case, the mono printing
feature is preset in the
printer properties.
When you copy, the
Black Start button will
be activated only with
this condition.
If you do not select any,
the machine will work as
Stop is selected.
Replace the toner
cartridge for the best
print quality when this
message appears. Using
a cartridge beyond this
stage can result in
printing quality issues.
(See "Replacing the
toner cartridge" on
page 48.)
Toner Exhausted
T
A toner cartridge has
reached its estimated
cartridge life. The
printer stops printing.
Replace the toner
cartridge. (See
"Replacing the toner
cartridge" on page 48.)
Toner Low
T
Small amount of toner
is left in the cartridge.
The estimated
cartridge life of toner
is close.
Prepare a new cartridge
for replacement. You
may temporarily
increase the printing
quality by redistributing
the toner. (See
"Redistributing toner" on
page 47.)
Transfer Belt
Error
A problem has
occurred in the
transfer belt in the
machine.
Turn the power switch
off and on. If the problem
persists, call for service.
Tray
Paper Empty
There is no paper in
the tray.
Load paper in the tray.
Tray
Paper Mismatch
The paper size
specified in the printer
properties does not
match the paper you
are loading.
Load the correct paper in
the tray.
MESSAGE MEANING
SUGGESTED
SOLUTIONS
Page view 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 217 218

Comments to this Manuals

No comments