SyncMaster P50FP,P63FPPDP MonitorUser Manual
Others(Not available in all loca-tions)(3301-001305)Sold separatelyDVI Cable Wall Mount KIT LAN CableTV tuner box NetWork Box Semi Stand KIT(P50FP)
Play OptionYou can set the repeat play and screen settings.Repeat : Determines the repeat option for playing movies and music.• None - Select No Repea
TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that
• Do not use benzene, thinner or other flammable sub-stances, or a wet cloth.• We recommend that a SAMSUNG cleansing agentis used to prevent damage to
A: Check if the signal cable between the computer and the PDP Display is securely con-nected.(Refer to Connecting a Computer)Problems related to the S
Q: The screen color is inconsistent.A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image is distorted by dark shadows.A: Ad
A: Check the polarities (+/-) of the batteries.A: Check if the batteries are empty.A: Check if the power is on.A: Check if the power cord is securely
Set the resolution in the Control Panel → Appearance and Themes → Display → ScreenSaver.Set the function in the BIOS-SETUP of the computer. (Refer to
SpecificationsGeneralGeneralModel Name SyncMaster P50FPSyncMaster P63FPPDP PanelSize SyncMasterP50FP50 " Diagonal (127 cm)SyncMasterP63FP63 "
Power SupplyAC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 HzSignal Cable15pin-to-15pin D-sub cable, DetachableDVI-D to DVI-D connector, Detachable (Sold se
Dot AcceptableFor example, the number of PDP sub pixels contained in this product are6,220,800. NoteDesign and specifications are subject to change wi
Your PDP DisplayFrontSOURCE button [SOURCE]Switches from PC mode to Video mode. Changing the source is only al-lowed for external devices that are con
PowerSaverThis PDP Display has a built-in power management system called PowerSaver. This systemsaves energy by switching your PDP Display to low-powe
Display Mode HorizontalFrequency(kHz)Vertical Fre-quency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)VESA, 800 x 600 37.879 60.317 40.000 +/+VESA, 800 x 600
InformationFor Better Display Adjust the computer resolution and screen injection rate (refresh rate) on thecomputer as described below to enjoy the b
Power Off, Screen Saver, or Power Save Mode• Turn the power off for 4 hours after 20 hours in use.• Turn the power off for 2 hours after 12 hours in u
• Use Bright colors with little difference in luminance.- Cycle : Change the characters color and background color every 30 minutes.• Every 30 minutes
- Select method• Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel• Time Interval : 1 ~ 10 hours ( Recommend : 1 )• Time Perio
• Time Interval : 1 ~ 10 hours ( Recommend : 1 )• Time Period : 10 ~ 50 second ( Recommend : 50 ) Note( Please check CD's User Guide at "OSD
AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact theSAMSUNG customer care cent
EuropeBELGIUM 02 201 2418 http://www.samsung.com/beCZECH REPUBLIC 800 - SAMSUNG(800-726786)http://www.samsung.com/czDENMARK 8 - SAMSUNG(7267864) http:
Asia PacificAUSTRALIA 1300 362 603 http://www.samsung.com/auCHINA 800-810-5858400-810-5858010-6475 1880http://www.samsung.com/cnHONG KONG:3698 - 4698
Power indicatorShows PowerSaver mode by blinking green. NoteSee PowerSaver described in the manual for further information regardingpower saving funct
Interlace and Non-InterlaceMethodsShowing the horizontal lines of the screen from the top tothe bottom sequentially is called the Non-Interlace method
Reproduction in any manner whatsoever without the written permission of Samsung Elec-tronics Co., Ltd. is strictly forbidden.Samsung Electronics Co.,
BNC/COMPONENT OUT [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Ter-minal (Output))BNC (Analog PC) Connection: connectingthe R, G, B, H, V ports.C
Connect the [ VIDEO ] terminal of your PDPDisplay to the video output terminal of theexternal device using a VIDEO cable. AV/COMPONENT AUDIO IN [L- AU
Rear(P63FP) NoteFor detailed information concerning cable connections, refer to Connecting Cables underSetup. The PDP Display 's configuration at
RS232C OUT/IN (RS232C Serial PORT)MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AU-DIO IN] (PC/DVI/HDMI Audio Connection
Remote Control NoteThe performance of the remote control may be affected by a TV or other electronic deviceoperating near the PDP Display , causing a
1. POWERTurns the product On.2. OffTurns the product Off.3. Number Buttons Press to change the channel.4. DEL buttonThe "-" button oper
19. ENTER/PRE-CHThis button is used to return to the immediately previouschannel.20. CH/P In TV mode, selects TV channels.21. D.MENU DTV menu displa
Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property dam-age.Make sure to read the
31. SWAP Swaps the contents of the PIP and main image. The imagein the PIP window will appear on the main screen, and themain screen image will appear
Installation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.• Purchasing VESA Bracket and Installation
Wall Bracket(1) Hinge(Left 1, Right1)PlasticHanger(4)Screw(A)(11)Screw(B)(4)Anchor(11)Wall Bracket Assembly NoteThere are two hinges(left and right).
A - Length between the two locking holes3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bitto drill holes deep
2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the leftand right pl
A - PDP DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc
Mechanical Layout (P63FP)Mechanical LayoutNETWORK MODEL SIZEPDP Display HeadNETWORK MODEL SIZEWall Bracket Installation• Contact a technician for inst
Wall Bracket(1) Hinge(Left 1, Right1)PlasticHanger(4)Screw(A)(11)Screw(B)(4)Anchor(11)Wall Bracket Assembly NoteThere are two hinges(left and right).
A - Length between the two locking holes3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bitto drill holes deep
2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the leftand right pl
Ensure that the power plug is plugged into the power outletfirmly and correctly.• Otherwise, this may result in fire. Do not forcefully bend or pull
A - PDP DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc
ConnectionsConnecting a ComputerUsing a Power cord with Earth• In the event of failure, the earth lead may cause electric shock. Makesure to wire the
Using the BNC (Analog) connector on the video card.• Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, Vports on the back of your PDP Displ
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port ofthe PDP Display.2. Then, start the DVD, VCR or Camcorders with a
Connecting a DVD Player1. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [L-AUDIO-R]on the PDP Display and the AUDIO OUT jacks on the
Note• Select Component for the connection to a DTV Set Top Box using the SOURCE buttonon the front of the PDP Display or on the remote control.• For
Connecting to an Audio System Note• Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM andAUDIO OUT [L-AUDIO-R] on PDP Displ
Using the SoftwareInstallation MagicInfo ProInstallation1. Insert CD into the CD-ROM drive.2. Click the MagicInfo Pro installation file.3. When the In
6. Choose a folder to install the MagicInfo Pro program.7. Click "Install."Using the Software
8. The "Installation Status" window appears.9. It is recommended restarting the system for the normal operation of the MagicInfo ProServer p
Keep heating appliances as far away from the power cord or theproduct as possible.• Otherwise, this may result in electric shock or fire. Do not inst
10. When the installation is complete, the MagicInfo Pro executable icon appears on yourdesktop.11. Double-click the icon to start the program.System
Introduction A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS
Main Icons Select ButtonRemocon Info GridSafety Lock Display SelectionPort Selection Control Tools 1. Use the main icons to switch into each screen
1. The Multiple Display Control is originally set to COM1.2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Sele
Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer2. Use the
- Turns the power of the selected display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of
Info Grid shows some basic information necessary to Input Source Control.1) PC - Changes the Input Source of the selected display to PC.2) BNC - Ch
Info Grid shows some basic information necessary to Image Size Control.1) ( Power Status) - Shows the power status of the current display.2) Image
Info Grid shows some basic information necessary to Image Size Control.1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Comp
Info Grid shows some basic information necessary to Time Control.1) Current Time - Set the current time for the selected display (PC Time).- To cha
When cleaning the power plug pins or dusting the power outlet,clean it with a dry cloth.• Otherwise, it may result in fire. When cleaning the product
Info Grid shows some basic information necessary to PIP Size Control.1) PIP Size - Shows the current PIP Size of the display in use.2) OFF - Turns
Info Grid shows some basic information necessary to PIP Source Control.1) PIP Source - PIP Source can be controlled with turning on the PDP Displ
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is di
1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to Settings Control. W
Audio 1. Click Settings of the main icons and the Settings Control screen appears.Info Grid shows some basic information necessary to Settings Cont
Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC.2) Coarse - Adjusts Coarse of the s
An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sources. 2
1) Safety Screen - Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of time. You can
1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays
If thunder or lightening is occurring, do not touch the power cordor antenna cable.• Otherwise, this may result in electric shock or fire. Do not try
Adjusting the PDP DisplayInputAvailable Modes• PC / BNC / DVI• AV• HDMI• MagicInfo• TV• Component Note• The TV menu is available when a TV tuner box i
This is deactivated when a TV tuner box is installed.5. MagicInfoThis is activated when a network box is installed.6. TVThis is activated when a TV tu
Picture [PC / BNC / DVI / HDMI / MagicInfo Mode]Available Modes• PC / BNC / DVI / HDMI• AV• MagicInfo• TV• Component Note• The TV menu is available wh
Although the values are carefully chosen by our engineers, the pre-configured valuesmay not be comfortable to your eyes depending on your taste.If thi
1. Off2. Cool3. Normal4. Warm5. Custom NoteIf you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function isdisabled.If you set t
NoteThis function is only enabled if the Color Tone is set to Off.Image Lock Image Lock is used to fine-tune and get the best image by removing noise
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolutionin the control panel, the auto function is performed.(Avail
MENU → → ENTER → [Picture] → → → → → → → ENTER → [SignalBalance] → → ENTER → [Signal Control] → → → ENTER → [B-Gain] → , → ENTER4. R-O
• AV• HDMI / DVI• MagicInfo• TV• Component Note• The TV menu is available when a TV tuner box is installed.• The MagicInfo menu is available when a ne
Adjusts the Contrast.BrightnessMENU → → ENTER → [Picture] → → ENTER → [Custom] → → ENTER → [Bright-ness] → , → ENTERAdjusts the Brightness.Sha
If you continually move closer to the product screen, your eye-sight may be failing. Take a rest for at least five (5) minutes after using the monito
1. Off2. Cool23. Cool14. Normal5. Warm16. Warm2 NoteIf you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Tempfunction is disa
• ZOOM1, ZOOM2 will be unavailabel in HDMI mode.• The Position and Reset functions are available when ZOOM1 or ZOOM2 is run.Digital NR (Digital Noise
• HDMI• MagicInfo• TV• Component Note• The TV menu is available when a TV tuner box is installed.• The MagicInfo menu is available when a network box
• If you adjust sound using Custom function, Mode will turn to Custom mode.BassMENU → → → ENTER → [Sound] → → ENTER → [Custom ]→ENTER→ [Bass] → ,
SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannelcontent over two speakers. TruSurround delivers a compelling
You can choose one of 11 languages. NoteThe language chosen affects only the language of the OSD. It has no effect on any softwarerunning on the compu
7. 180On TimerMENU → → → → ENTER → [Setup] → → ENTER → [Time ] → → → ENTER→[On Timer] → , / , → ENTERTurns the PDP Display on automatic
4. OpaqueSafety Lock PIN MENU → → → → ENTER → [Setup] → → → → ENTER → [Safety Lock PIN ] →[0~9] → [0~9] → [0~9] → [0~9]The password can be cha
When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradationin the screen quality, such as an increase in the black level, a
The Format can be selected to see a divided screen.1. FullProvides a full screen without any margins.2. NaturalDisplays a natural image with the origi
The batteries (and rechargeable batteries) are not ordinary re-fuse and must be returned for recycling purposes. The customeris responsible for retur
Screen DividerMENU → → → → ENTER → [Setup] → → → → → → → ENTER → [VideoWall ]→ → → → → ENTER → [Screen Divider]The screen can be
NoteThe Pixel Shift is not available when Video Wall is On.Horizontal DotMENU → → → → ENTER → [Setup] → → → → → → → → ENTER →[Safety Sc
TimerTimerMENU → → → → ENTER → [Setup] → → → → → → → → ENTER →[Safety Screen] → → ENTER → [Timer] → ENTER → [Timer] → , → ENTERYo
Use this function to set the execution period for each mode set in the timer.TimeMENU → → → → ENTER → [Setup] → → → → → → → → ENTER →[S
This function prevents after-images on the screen by moving long black and white verticallines.EraserMENU → → → → ENTER → [Setup] → → → → →
This function prevents after-images on the screen by moving a diagonal pattern stored in thepanel repeatedly.Resolution Select MENU → → → → ENTER
Adjusts the Power On time for the screen.Caution: Set the Power On time to be longer to avoid overvoltage.Side Gray MENU → → → → ENTER → [Setup] →
NoteThe Reset function is not available when Video Wall is On.Color Reset MENU → → → → ENTER → [Setup] → → → → → → → → → → → → ENTE
• AV• HDMI• MagicInfo• TV• Component Note• The operating system for this set only supports English so the other languages might becorrupted on the scr
• When the contents of Setup have been changed when EWF is in the Enable state, tosave the changes in the disk, you must Commit them.• By selecting Di
IntroductionPackage Contents NotePlease make sure the following items are included with your PDP Display.If any items are missing, contact your dealer
4. Connect your keyboard and mouse and press the “ALT + F12” keys on your keyboard.5. The Windows Desktop is displayed and the Magicinfo pro icon (the
7. The Player screen of Magicinfo pro is displayed. NoteTo finish the MagicInfo, press ALT + F12.Photo The JPEG, BMP file format are supported.Adjusti
AutoAutomatically fits the image to the window.OriginalShows the properties of the original file.Slide ShowDisplays the properties of the original fil
IntervalControls the time intervals between image files for a slide show. (5 Sec, 10 Sec, 20 Sec, 30Sec, 60 Sec)RotationDisplays an image file by turn
ZoomDisplays a reduced picture.CloseCloses the image control Menu.Adjusting the PDP Display
Music The MP3 file format is supported.MovieThe MPEG1, WMV file format are supported.PlayPlays a movie file.Adjusting the PDP Display
Full SizePlays a movie file in full screen.OFFICE / HTMLPPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note• Insta
InternetConnects to the InternetSetupSets various functions in MagicInfo mode. A password must be entered to access Setupmode.Schedule ViewDisplays a
TCP/IPChanges the TCP/IP settings.ConnectionModifies the network settings.Adjusting the PDP Display
PasswordThe password can be changed.• The password should be between 6 and 12 characters in numeric format.(You should enter a password between 6 and
Comments to this Manuals