13
English
Basic Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1
Press the POWER button on the remote control. You can set the menu language.
menu is automatically displayed. Select the appropriate language by pressing the
▲ or ▼ button.
Press the ENTER
E
button to confirm your choice.
2
Press the ◄ or ► button to select Store Demo or Home Use, then the
ENTER
E
button.
We recommend setting the TV to ■ Home Use mode for the best picture in your
home environment.
Store Demo ■ mode is only intended for use in retail environments.
If the unit is accidentally set to ■ Store Demo mode and you want to return to
Home Use (Standard): Press the Volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3
Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼
button. Press the ENTER
E
button to confirm your choice.
4
Press the ▲ or ▼ button to memorize the channels of the selected connection,
then press the ENTER
E
button.
Air ■ : Air antenna signal.
Cable ■ : Cable antenna signal.
5
Press the ▲ or ▼ button to select the channel source to memorize. Press the
ENTER
E
button to select Start.
Digital & Analogue ■ : Digital and Analogue channels.
Digital ■ : Digital channels.
Analogue ■ : Analoguechannels.oguechannels.e channels.
For more detailed description of selecting Cable mode, refer to page 15.
•
The channel search will start and end automatically. •
After all the available channels are stored, the message • Set the Clock Mode.
is displayed.
6
Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press
the ENTER
E
button.
If you select ■ Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. ■
If not, see page 30 to set the clock.
7
The brief instruction on How to get the best performance from your new HDTV.
is displayed. Press the ENTER
E
button.
This menu is available ■ HD Connection Guide in the Support menu.
8
The message Enjoy your TV is displayed. When you have finished, press the
ENTER
E
button.
If you want to reset this feature...
1
Press the MENU button to display the menu. Press the ▲ or ▼ button to select
Setup, then press the ENTER
E
button.
2
Press the ENTER
E
button again to select Plug & Play.
3
Enter your 4 digit PIN number.
The default PIN number of a new TV set is ‘0-0-0-0’. ■
If you want to change PIN number, refer to page 31. ■
Plug & Play
You can set the menu language.
U
Move
E
Enter
▲
Nederlands
English
Eesti
▼
Menu Language :
Setup
Plug & Play
►
Menu Language : English
Time
Broadcast
Security
General
Press the ■ ENTERE button
at any time to interrupt the
memorization process.
The ■ Plug & Play feature is only
available in the TV mode.
Basic Operation
The Screen Saver is activated ■
if there is no remote control key
input for longer than 1minute
while Plug & Play is running.
The Screen Saver is activated if ■
there is no operating signal for
longer than 15 minutes.
BN68-02354D.indb 13 2009-06-30 �� 10:21:03
Comments to this Manuals