Samsung SVMi-4 User's Guide download pdf (Page 110)

ENTER to start Call Progress Training. Four conditions apply to the train routine:

● If only the Ringing Number value is filled in, only those values which per-

tain to a ring signal will be modified by running the Call Progress Train rou-

tine.

● If only the Busy Number value is filled in, only those values which pertain

to a busy signal will be modified by running the Call Progress Train routine.

● If no numbers are provided for Ringing or Busy, and Retrain is set to ‘N’,

the factory default settings are automatically filled in by SVMi-4.

● If no numbers are provided for Ringing or Busy, and Retrain is set to ‘Y’,

SVMi-4 will give an error warning.

There are five types of Station Blocks preset on SVMi-4: Template, Beeper, Long

Distance, Off-Premise, and On-Premise.

Each of these Block types comes with factory preset settings which should not

be changed. If you want to change any of these parameter settings, press Ctrl+A

to bring up the Copy Block dialog. Enter a new name for the Block and press

ENTER. You now have a new Station Block. Make the necessary parameter set-

ting changes to the new Block and assign it as necessary. Save the original five

Station Blocks with their factory default settings for future reference and use.

Programming - Page 107

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 123 124

No comments

Samsung SVMi-4 User's Guide Page 110