Samsung UD55D User Manual Page 111

  • Download
  • Add to my manuals
  • Print
  • Page
    / 234
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 110
111
System
Chapter 07
Multi Control
MENU
m : T
System Multi Control ENTER
--
Multi Control
ID Setup
ID Input
MDC Connection
DisplayPort Daisy Chain
00
RS232C MDC
Clone
-
The displayed image may differ depending on the model.
Conguring settings for Multi Control
ID Setup
Assign an ID to a set. (Range: 0~99)
Press
or to select a number, and press .
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
MDC Connection
Select a method to connect to MDC to receive the MDC signal.
-
RS232C MDC: Communicate with MDC via the RS232C-stereo cable.
-
RJ45 MDC: Communicate with MDC via the RJ45 cable.
DisplayPort Daisy Chain
To display the DP IN video input through the DP OUT output port, select a device connection method from Single
Stream Transport (SST) and Multi Stream Transport (MST).
Clone: In this Single Stream Transport (SST) output mode, the same screen output is displayed on two display devices
connected.
If Clone is selected, the PC recognizes the two displays as a single monitor.
Clone mode is enabled if the input source is a digital input other than DisplayPort, such as DVI, HDMI, MagicInfo.
Expand: In this Multi Stream Transport (MST) mode, a different screen output is displayed on two display devices
connected.
If Expand is selected, the PC recognizes the two displays as separate monitors.
The mode functions only on a PC that supports DisplayPort 1.2 MST.
For Full HD resolution (1920x1080) displays, a maximum of four displays can be connected.
Page view 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 233 234

Comments to this Manuals

No comments