Samsung SNP-1000A User Manual

Thank you for purchasing a SAMSUNG iPOLiS Network Camera. Before attempting to connect or operate this product, please read these instructions careful

  Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is

 camera settings. Default setting is OFF.  OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7 Days e

CChh66.. TTrroouubblleesshhoooottiinngg

 If there are problems in operation, please refer to the items below. If the problem persists, please contact the

Problem Solution The MOTION DETECTION function is not working.  Please check if 'MOTION DETECTION' mode is turned

 Problem Solution  Please check audio driver is working in user’s PC.  Please use the enclosed Audio Extensio

AAppppeennddiixx AA.. DDDDNNSS UUssaaggee

 Registration process of DDNS is as following:  Step1) Complete the registration form in iPOLiS website. The w

 Figure A-2. Membership Registration: SIGNUP Figure A-3. Membership Registration: Input your information.

  Step2) Register the equipment after login. Figure A-4. Login Figure A-5. The list of registered equipment.

 Figure A-6. Product Registration. (Confirm repetition certainly at domain registration.) Figure A-7. The list of registered equip

 Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery re

  Step3) Configure DDNS information in the equipment.  Click the part of Network Configuration in website of

 Step4) Confirm the connection status of relevant product in product list of iPOLiS website. Figure A-8. The List of Product. Be ab

  Figure A-9. Product information Move to Login website of relevant product if click <view> button of ‘ vi

Specifications Camera Part Items SNP-1000AN SNP-1000AP Imaging device 1/4” Color Vertical Double Density Interline CCD. 410,000p

 Items SNP-1000AN SNP-1000AP Horizontal Rotation Speed Manual: 0.5° ~ 70°/s(64 levels) Preset: 0.5° ~ 140°/s(

Network Part Items SNP-1000AN SNP-1000AP Output Resolution NTSC : 704 x 480(D1), 704 x 240(Half D1), 352 x 240(CIF) PAL : 70

 Dimension

SAMSUNG TECHWINwww.samsungtechwin.comwww.samsungipolis.comSAMSUNG OPTO-ELECTRONICS AMERICA, LTD.1480 Charles Willard St. Carson, CA90746Tel: +1-310-63

 Product Warranty and Limitations The manufacturers of this product do not take any responsibility for this product

Warning Symbols Before attempting to connect or operate this product, please read these instructions carefully and save this manual

 y There is risk of shock or fire; be sure to avoid setup in places with high humidity. y To prevent shocks, ple

y Random replacement of built-in battery by other types of batteries may cause explosion. The battery shall be replaced by the same batter

 y Do not install under unstable lighting conditions. Severe lighting changes or flickering may hinder normal cam

CChh11.. OOvveerrvviieeww

 1.1. 10X PTZ Network Camera SNP-1000A Introduction The SNP-1000A is a high-tech network camera that uses MPEG-4 c

• Auto Swing Pan or Tilt is operated in sequence between 2designated positions. • Group Search Maximum 128 Preset positions are tou

  128 Preset Position A maximum of 128 Preset positions can be set up. This function enables users to set up the

CChh22.. SSeeccttiioonn nnaammeess aanndd ffuunnccttiioonnss

 2.1. Body 2.2. Rear panel  Power Connector  Audio Input Connector  Audio Output Connector  Alarm Input/Ou

2.3. Connection to external terminal

 Alarm Connection Terminal PIN NO. NAME Purpose #1 - Not Used. #2 - Not Used. #3 - Not Used. #4 S1 Alarm Input 1

CChh33.. IInnssttaallllaattiioonn aanndd NNeettwwoorrkk SSeettuupp

 3.1. Components and Accessories  Accessories  Products Sold Separately The following products are provided

3.2. Installation 3.2.1. Preparation for Cable To install and use the SNP-1000A, the following cables should be used. y Power Ad

 y Lan Network Cable The cable connected to the network device of SNP-1000A for Network communication is shown be

3. For the network connection of the SNP-1000A, connect the LAN Cable as the figure below shows. 4. Then, connect the Power Ad

 Preface Thanks for purchasing of 10X PTZ Network Camera SNP-1000A. This is a user instruction manual for a 10X PTZ Network Camera SNP-10

 3.2.3. Installation of SNP-1000A  Precautions for Installation  Check that the installation location can safe

3.2.4. Installing the SNP-1000A on a Ceiling 1. Prepare the accessories in the camera box (power adapter, installation template,

 the template so that the front of the template is in line with the camera direction.  Caution: Since there is a

3.2.5. Installing the SNP-1000A Wall Mount 1. Prepare the accessories in the camera box (power adapter, audio extension cable, 2

 the template so that the front of the template is in line with the camera direction.  Caution: Since there is a

5. To complete installation, rotate the installation cover along the groove of the ceiling attachment bracket, and fix it. 3.2

 3.3. Network configuration and connection method 3.3.1. Configuration/connection using Web page Use when there is

3. After pressing internet protocol (TCP/IP) properties, press the ‘advanced’ button to go into a

  Note Default value is ID : admin, PW : 11111111 7. Please configure according to the network environment wher

 LAN / xDSL/ DHCP Configuration Item Description LAN Use When network product is connected to

 Note Use SWR changes its IP address every time the user attempts to connect to the ISP and when the product is co

CChh44.. HHooww ttoo UUssee WWeebb VViieewweerr

 4.1. How to Use Web Viewer 4.1.1. Login To connect to the login page, click the ‘move to Webpage’ button on Netwo

4.1.2. Web Viewer screen Web Viewer screen is composed of menu area for camera/video configuration and screen area for d

  Stretch Image When selecting resolution with Half D1 and CIF, stretches channel screen to resolution D1 size.

 Pause Stops video for a while. OSD Displays related information. Displays the title Removes the title

  Deinterlace On/off function of Deinterlace. Screen where Deinterlace is not applied Screen where Deinterl

 Camera Setup Displays OSD control button of camera. Camera OSD control button is displayed Camera OSD is displayed

  Note  The left/right slide bar can control focus (left slide bar) / zoom (right slide bar)  The “+” displaye

4.1.3. Area Zoom guide Area Zoom function supports easy and fast PTZ (Pan/Tilt/Zoom) control for the selected image area

Contents Preface ... i Contents ...

  Screen image of new PTZ position moved by one time click.  Clicking mouse left button only controls PTZ posit

 Screen image of expanded area  Releasing mouse left button stimulates automatic PTZ function mode at the selected ima

  Storage item Function Go to 1x Zoom Move to 1x Zoom from present PTZ position Previous PTZ Move to previous P

4.2. Using Administration page 4.2.1. Initialization Screen after Connecting When connection is successful, the belo

 4.2.2. Live Please Move to Web Viewer page [Web Viewer live screen]

4.2.3. Basic Configures basic information for camera. Video/Audio Setup Item Description Compression Video compre

 Item Description Video Channel Selects the video channel to be used in the camera. Audio-In Channel Selects whet

4.2.4. Network Configures network information of the camera. Network Configuration According to the user’s network

 Port/DDNS Configuration Item Description Connection Port This controls communication with camera. (Default : 4

 Item Description Administrator Password Change Change password of administrator Guest Setup User clicks ‘Guest’ bu

 3.3. Network configuration and connection method ...32 3.3.1. Configuration/connection using Web page ...

  Example 1) In case control function is limited (Do not check Controls box)  Pan, tilt, zoom, audio output,

4.2.6. Pan/Tilt/Zoom Configures PTZ Swing and Preset of the camera.

  Item DescriptionChannel Select the channel of camera. PTZ Display Display PTZ menu. OSD Display Display OSD

4.2.7. Motion Detection This sets up motion detection function of camera. Item Description Grid Display Basic gri

 4.2.8. Alarm/Sensor This sets up necessary information when using alarm function by attaching sensor to camera.

Alarm/Sensor Setup  Digital In Setup Item Description Sensor Type Types of sensors are ‘Normal open’ and ‘Normal c

 Item Description Recipient E-mail Address 1 Recipient E-mail Address 2 You can designate up to two e-mail addres

4.2.9. Time Current Time Item Description Date Current setup date displayed Time Current setup time displayed T

 4.2.10. LOG Recent activities made for camera are displayed as log. Item Description Lines Set up number of li

4.2.11. Upgrade Upgrade program of 10X PTZ Network Camera SNP-1000A. System Upgrade Configuration. Item Descriptio

5.2.4. Exposure... 75 5.2.5. Back Light ...

 4.2.12. System Reboot System is rebooted after confirmation procedure of administrator. Click <OK> button

CChh55.. HHooww ttoo OOppeerraattee CCaammeerraa

 5.1. OSD Menu Organization PTZ camera can be set up on the OSD (On Screen Display) menu displayed on the video mo

 Sequence Setting P1 P2 P3 P4 DefaultsPreset Setting Edit Execute Clear Status Pan Swing Setting Ex

  OSD Setting P1 P2 P3 P4 DefaultsCamera Name ON/OFF Edit ➋Preset Number ON/OFF ➊Position ➋ON/OFF ON

5.2. PTZ Camera User Menu Settings Execution of OSD Menu : After checking if the camera is in manual operation m

 ➊Focus Mode  Auto : The camera adjusts the focus automatically while monitoring the screen continuously in the

 When the objects in the long and short distance are under the same surveillance area  When there is no contr

  AWC: Set up the lighting to the objects and corrects the right colour temperature to that of a white object. C

5.2.4. Exposure Camera exposure can be controlled. ➊Brightness The brightness of the screen can be adjusted. ➋I

 5.5.5. Area Name... 93 5.5.6. PTZ Position ...

  If the Manual or A.FLK mode is selected for the Shutter menu, the Sens-Up function is disabled. ➍Sens-Up  A

5.2.6. AGC When the brightness of the image taken under dark light is under a certain level, the AGC (Automatic

  HIGH : Noise reduction effect is excellent but afterimage is also strong. Note When you select the AGC mode a

 AUTO : Under day condition, the mode is automatically changed into the COLOR mode to keep an optimum colour.

 5.3. Sequence Setting Sequence Setting Menu 5.3.1 Preset 12 items such as Pan/Tilt location, Zoom and Focus are

 Preset Menu Setting 1. Select the Preset item on the Sequence Setting Menu 2. Select the Setting item. 3. Select the

  Note In the White Balance setting of the individual Preset Scene Adj., the AWC selection is not available. 5.

is the moving speed (01-64step). DWL is the stop time (00-120sec). Press the Execution key in the location with selection mar

   Setting : The registered Group Sequence is selected by clicking the mouse and confirmed with the Execution ke

 Memorize: Manual operations for minimum 120 seconds after executing this function are memorized into the internal memory.

 Note to User This machine’s electromagnetic waves have been registered as suitable for business purposes; the retailer and consumer sh

  Time : Auto Run operation is executed after a certain time designated by the user.(Time can be set up by the u

5.4. P/T Setting 5.4.1. Pan Limit The moving range in the Pan direction can be limited.  Position : Moving range can be set up.

 resumption depending on position setting. This does not mean it is out of order.  On/Off : The application of l

5.4.4. Area Masking If you want to exclude some areas for surveillance, they can be turned into black. You can mask 4 parts of one

  5.4.6. Digital Flip When you operate the Tilt up to 100° limit and keep it for a certain time, the image gets r

5.5. OSD Setting 5.5.1. Camera Name Camera name is set up. Note If you want to edit the item, move the cursor. Then select the c

 5.5.2. Preset Number Preset numbering is set up. (Default setting is ON.) 5.5.3. Preset Name  Edit : A maxim

 On/Off : The operation of this function is predetermined. Default setting is On. 5.5.4. Sequence Status Display of the Seque

 5.5.6. PTZ Position Pan and Tilt position and Zoom magnification are displayed. PTZ positions are not displayed i

5.6. Initialization Setting Initialization Menu Power On Reset Camera is initialized into the original status of po