Samsung RSA1NTSL User Manual download pdf (Page 4)

4_ safety information

• In order to avoid the creation of a ﬂammable gas-air mixture if a leak in the

refrigerating circuit occurs, the size of the room in which the appliance may be sited

depends on the amount of refrigerant used.

• Never start up an appliance showing any signs of damage. If in doubt, consult your

dealer.

• The room must be 1m

in size for every 8g of R600a refrigerant inside the appliance.

• The amount of refrigerant in your particular appliance is shown on the identiﬁcation

plate inside the appliance.

• Please dispose of the packaging material for this product in an environmentally

friendly manner.

• Pull the power plug out of the socket before changing the interior light of the

refrigerator.

- Otherwise, there is a risk of electric shock.

SEVERE WARNING SIGNS

•

Do not install the refrigerator in a damp place or place where it may come in contact with water.

- Deteriorated insulation of electrical parts may cause an electric shock or ﬁre.

• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room

heaters or other appliance.

• Allow sufﬁcient space to install the refrigerator on a ﬂat surface.

- If your refrigerator is not level, the internal cooling system may not work correctly.

• Do not plug several appliances into the same multiple power board. The refrigerator

should always be plugged into its own individual electrical which has a voltage rating that

matched the rating plate.

- This provides the best performance and also prevents overloading house wiring circuits,

which could cause a ﬁre hazard from overheated wires.

• Never unplug your refrigerator by pulling on the power cord. Always grip plug ﬁrmly and

pull straight out from the outlet.

- Damage to the cord may cause a short-circuit, ﬁre and/or electric shock.

• Make sure that the power plug is not squashed or damaged by the back of the

refrigerator.

• Do not bend the power cord excessively or place heavy articles on it.

- This constitutes a ﬁre hazard.

• Have the power cord repaired or replaced immediately by the manufacturer or its service

agent if power cord has become frayed or damaged.

•

Do not use a cord that shows cracks or abrasion damage along its length or at either end.

• If the power cord is damaged, have it replaced immediately by the manufacturer or its

service agent.

• When moving the refrigerator, be careful not to roll over or damage the power cord.

• Do not insert the power plug with wet hands.

• Unplug the refrigerator before cleaning and making repairs.

• Do not use a wet or damp cloth when cleaning the plug.

• Remove any foreign matter or dust from the power plug pins.

- Otherwise there is a risk of ﬁre.

• If the refrigerator is disconnected from the power supply, you should wait for at least ten

minutes before plugging it back.

• If the wall socket is loose, do not insert the power plug.

- There is a risk of electric shock or ﬁre.

• The appliance must be positioned so that the plug is accessible after installation.

safety information

WARNING

1 2 3 4 5 6 7 8 9 ... 35 36

Comments to this Manuals

No comments

Samsung RSA1NTSL User Manual Page 4

Comments to this Manuals

Related products and manuals for Side-by-side fridge-freezers Samsung RSA1NTSL