Samsung RSH1DBRS User Manual download pdf (Page 21)

setting up _21

setting up your side-by-side

refrigerator

Remove any residual matter inside the puriﬁer. (Model with the puriﬁer)

- Open the main water tap to check whether

water is running through the water tube on the

water inlet side of the puriﬁer.

- If water does not come out through the line,

check whether the tap is open.

- Leave the tap open until clean water is running

out and any residual matter that built up during

manufacturing has been removed.

Attach the puriﬁer lock stations.

- Hold the puriﬁer lock stations in the appropriate

position (under the sink for example) and ﬁx it tightly

into place where to screw.

Secure the puriﬁer in position.

- Fix the puriﬁer in position, as shown in the

ﬁgure on the right.

Connect the water line to the refrigerator.

- Remove the compressor cover of the refrigerator.

- Connect the water line to the valve, as shown in the

ﬁgure.

- When connected, check if there is any leakage.

If any, repeat the connection.

- Reattach the compressor cover of the refrigerator.

Secure the water line.

- Using clip ”A”, ﬁx the water line to the wall (the back of

refrigerator).

- When the water line is secure, make sure whether the water line

is not excessively bent, pinched or squashed.

01 SETTING UP

WATER LINE

PURIFIER

WATER

OUTLET SIDE

OF PURIFIER

CLIP A

WATER LINE

TIGHTENING

BAND

PURIFIER

WATER TUBE

PURIFIER

LOCK

STATIONS

TWO PURIFIER LOCK

STATION

TWO PURIFIER LOCK

STATION

WATER LINE

INSTRUCTIONS

COMPRESSOR COVER OF

REFRIGERATOR

CONNECTION NUT

DA68-01652A(HM)-EN(0.5).indd 21 2007.6.4 11:50:14 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comments to this Manuals

No comments

Samsung RSH1DBRS User Manual Page 21

Comments to this Manuals

Related products and manuals for Side-by-side fridge-freezers Samsung RSH1DBRS