Samsung SCC-C6407 User Manual

Part : AB68-00600A(00)Printed in ChinaSCC-C6407EFEsJSmartDome CameraOwner’s InstructionsManuel d’instructionManual del usuario00600A-SCC-C6407-ENG 8/

To install and use the SCC-C6407, the following cables should beprepared.Power Adapter CableThe cable that plugs into the SCC-C6407 power input recept

Installing SCC-C6407Installation Precautions1) Make sure that the installation site can sufficiently support a minimum offour times the net weight of

5) CEILING MOUNT ADAPTOR (SADT-100CM)This adaptor is used for installing the indoor housing or the outdoorhousing for the SmartDome Camera to a concre

2-9E2-87. [Figure 7] Match the 3 holes on theback of the CAMERA and theCONNECTOR and turn it left about15 degrees.(Check the sound of LOCKING and that

3-2E3-1Structure of the Setup MenuIn this chapter, we will look over the Setup Menu of the SCC-C6407, First we'll look over the overall structure

3-3 3-4E1. CAMERA SET MENUCAMERA IDThe CAMERA ID menu assigns an ID to the SCC-C6407 to be displayed onthe connected monitor.On the CAMERA SET menu sc

3-5 3-6ECOLOR/BWIn the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter.In a poor illumination environment, the IR filter is turned of

3-8E3-7➜Press [Enter](CAMERA SET)CAMERA ID OFFV-SYNC INTCOLOR/BW AUTO...MOTION DET OFFZOOM SPEED 3DIGITAL ZOOM OFFDISPLAY ZOOM OFFDISPLAY P/T OFFEXIT

3-10EEXITThe EXIT menu is used to quit the CAMERA SET menu of the SCC-C6407 and return to the MAIN MENU.- QUIT : Ignores the changed information and r

3-12E3-11SHUTTERYou may designate both the fast electronic shutter speed and lowelectronic shutter speed in the SHUTTER menu. The fast electronicshutt

EImportant Safety InstructionsSafety PrecautionsThe purpose of this information is to ensure proper use of this product toprevent danger or damage to

3-14E3-13WHITE BAL Lights are generally denoted as color temperatures and expressed inKelvin (K) units. The general light color temperatures are sho

3-16E3-15FOCUS MODEIn the FOCUS MODE MENU, the Focus method can be set to ONEAF(One AutoFocus), or MF(Manual Focus).- ONEAF : In the ONEAF mode, it au

3-18E3-17POSITION SETFrom "POSITION SET..." press [ENTER] to get into the PAN/TILT,FOCUS/ZOOM SET screen to set the PAN/TILT location and FO

3-20E3-19BLANK ALL BELOWThe available angle for setup ranges from OFF/0/-10 to -90 and the areabelow a set angle will be regarded as the ZONE area.PRI

3-22E3-21REVERSEThe REVERSE function applies PRIVACY MASK to the other area thanset as a privacy zone. ON/OFF is available.ZONE DIR SET/ZONE AREA SETT

3-24E3-23LOCATIONThe “LOCATION...” menu designates the left/right LIMIT positions ofZONE AREA. Enter the setup screen to move PAN, then select a start

3-26E3-25DIRECTIONThis sets up the movement direction of the START to END location (PAN location standard)"RIGHT " :

3-28E3-27AUTO PLAYAUTO PLAY executes SCAN, AUTO PAN, PATTERN, and PRESET when thereis no camera action after AUTO RETURN finishes.AUTO RETURNThis menu

3-30E3-297. OTHER SET PROPORTIONAL P/TThis function controls the PAN/TILT speed to the ZOOM magnificationratio during the manual operation of PAN/TILT

3-32E3-31➜Press [Enter]* * MAIN MENU * * CAMERA SET...VIDEO SET...PRESET...ZONE SET...AUTO SET...ALARM SET...OTHER SET...SYSTEM INFO...8. SYSTEM INFO

6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so mayca

3-34E3-33* SCC-C6407 has two FANs inside for preventing overheating.If FAN doesn't work properly, messages below will be displayed.In those case

3-35Product specificationsSCC-C6407Contents- Zoom lens single body WDR SmartDome CAMERA- AC 24 ± 10% (60Hz ± 0.3Hz)- 22W- NTSC STANDARD COLOR SYSTEM-

1-2E1-1Before UsageThis is a basic instruction manual for the SCC-C6407 user. It contains all the instructions needed to use the SCC-C6407 froma simp

1-4E1-34. ZONE SET ...3-19- PRIVACY ZONE ...

1-6E1-5SCC-C6407 IntroductionSCC-C6407 is a zoom lens built in smart dome camera whichprovides you with the best monitoring function in connection wit

1-8E1-7BACKLocations of ControlFRONT00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘ ` 1-7

1-10E1-9INITIAL SETTINGCAMERA ADDRESS SETUPUse SW701, SW702, or 703 for Camera Address setup. You may allocateup to 255 addresses by using SW701 to se

2-1E1-11Setting RS-422A/RS-485 terminationAs it is shown in the structure map, when Controller and RS-422A/RS-485 is connected it should be terminated