Samsung Falcon User's Guide download pdf (Page 41)

SET ANSWER MODE

You can receive internal calls in one of three modes (see Answering Intercom

Calls under Intercom Calls for descriptions):

• While on-hook, press TRANSFER and then dial 103.

• Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

• Press TRANSFER to store your selection.

NOTE: When your keyset is programmed for Auto Answer and you have For-

ward No Answer (FNA) turned on, you must answer screened transfers by

pressing the ANS/RLS key before your FNA timer expires or the call will for-

ward.

AUTOMATIC HOLD

While on an outside call, pressing a line key, route key or a flashing CALL

button will automatically put your call on hold and connect you to the next

call. This feature can be turned on or off at your keyset.

• With the handset on-hook, press TRANSFER and then dial 110.

• Dial 21 to turn Automatic Hold on or 20 to turn it off.

• Press TRANSFER to store your selection.

NOTE: Intercom calls can be automatically put on hold by pressing TRANS-

FER.

HEADSET OPERATION

Keyset users can switch between headset mode and handset mode. When

using headset mode, press the ANS/RLS key to answer and release calls.

• With the handset on-hook, press TRANSFER and then dial 110.

• Dial 41 to use the headset or 40 to use the handset.

• Press TRANSFER to store your selection.

Your keyset may be equipped with a Headset mode key. If it is so equipped

pressing this key while the light is out will cause the keyset to enter headset

mode and the light will illuminate to indicate this. Pressing the key while the

light is lit will cause the keyset to return to handset mode and the light will

go out.

HOT KEYPAD

On your phone system your keyset’s keypad can be made “live” or “hot”

so that it is not necessary to lift the handset or press the SPEAKER key

before you begin dialling. Calls can be made and features activated by sim-

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

No comments

Samsung Falcon User's Guide Page 41