Samsung SPP4231X-XAP User Manual download pdf (Page 20)

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial

cables (which you can buy from your Samsung dealer or any electronics store).

Find and disconnect the cable that is con-

nected to the ANTENNA IN terminal of

your cable box.

This terminal might be labeled "ANT IN",

"VHF IN" or simply, "IN". Connect this

cable to a two-way splitter.

Connect a coaxial cable between an OUT-

PUT terminal of the splitter and the IN termi-

nal of the cable box.

Connect a coaxial cable between the

ANTENNA OUT terminal of the cable box

and the B-IN terminal of the A/B switch.

Connect a coaxial cable between the

ANTENNA OUT terminal of the cable box

and the B-IN terminal of the A/B switch.

Connect the last coaxial cable between the

OUT terminal of the RF (A/B) switch and

the VHF/UHF terminal on the PDP.

After you've made this connection, set the A/B switch to the "A" position for normal viewing.

Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch

to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually

channel 3 or 4.)

BN68-00631B-00_014-061Eng 2004.6.9 10:56 AM Page 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

No comments

Samsung SPP4231X-XAP User Manual Page 20