Samsung TXP2675WHX-XAA User Manual download pdf (Page 18)

INSTALLATION

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a

cable TV system (according to the instructions on pages 14~17). Skip step 1 if you have not

yet connected to an antenna or a cable system.

Unplug the cable or antenna from the

back of the TV.

Connect the cable or antenna to the

ANTENNA IN terminal on the back of the

VCR.

Connect a coaxial cable between the

ANTENNA OUT terminal on the VCR and

the antenna terminal on the TV.

Connect a set of audio cables between

the AUDIO OUT jacks on the VCR and the

AUDIO jacks (AV1~AV3) on the TV.

If you have a “mono” (non-stereo) VCR,

use a Y-connector (not supplied) to hook

up to the left and right audio input jacks

of the TV. If your VCR is stereo, you must

connect two cables.

Connect a video cable between the

VIDEO OUT jack on the VCR and the

VIDEO jack (AV1~AV3) on the TV.

Follow the instructions in “Viewing an

External Signal Source” to view your VCR

tape.

Ferrite Core

The ferrite core is used to attenuate unde-

sired signals. When connecting cables, attach

the ferrite core to the cable near the connec-

tor.

TV Rear Panel

AA68-03263B-00_eng_Chapter2 4/21/04 5:31 PM Page 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

No comments

Samsung TXP2675WHX-XAA User Manual Page 18